- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
with a test light back probe the green wire behind the low beam then if test light on = bulb defect the blue one is for daytime running lights example : if 1 bulb is burn or open no daytime running lights p.s. you need to have 2 bulbs the same or it won't work
1. try to replace your headlight bulbs / running lights.
2. if this does not solve your problem, look for the relay switch for your headlights and replace it
3. for your running lights, search for the fuse (normally located under the driver's console) for your running lights.
On my 2007 Honda CR-V The DRL code appeared on the dash board. Additionally I had only one high beam (on the passenger side); both low beams were fine, but I did not have a Daytime Running Light on the drivers side. The DRL code was really misleading because the real problem was that the high beam element in the headlight bulb was burned out. Note that the daytime running light is not a seperate bulb -- it is the high beam element which is powered at a low voltage. Once I replaced the head light bulb everything worked fine and the DRL code on the dash board was gone. So if the DRL message appears what you really need to do is replace the headlight bulb (there are YouTube videos which show how to do this - but search for headlight replacement, not for DRL fix). Be careful not to touch the new bulb with you hands since premature burnout can occur from the grease off your skin. I got my bulb from Wal-Mart for $8.88 (it's a 9003/HB2 for the 2007 CR-V) -- that's a pretty cheap fix.
Im not sure I am following you. When it gets dark enough the "daytime" running lights should go off and the headlights and tail lights should come on for night time driving. The head light switch must be set in the "auto" position.
I had the "service vehicle soon" light come twice with in 1 year. First the heald light bulbs were gone. Replaced the head light bulbs and after 2 starts the "service vehicle soon" light was gone.
The second time the DRL - #194 amber bulbs were gone. Replaced these and the "service vehicle soon" light was gone after 2 starts. The DRLs are housed in the headlamp housing, the tiny bulbs beside the head light.