Question about 2002 Dodge Stratus

1 Answer

No fuel to the injectors - 2002 Dodge Stratus

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

1 Have you checked the Fuel Pump? 2 Have you Checked the Fuel Filter? Let me know so we can go Further!

Posted on Jan 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel Rail Leak


Did did you change the o-ring at the fuel line to fuel rail connector? Do that before you change the fuel rail. According to an e-bay seller who is selling a used fuel rail from his salvage shop, the following fuel rails are interchangeable.
300 05-10 Fuel Injector; 2.7L and 3.5L
AVENGER 08-10 Fuel Injector; 2.7L
AVENGER 08-10 Fuel Injector; 3.5L
CARAVAN 08-10 Fuel Injector; 4.0L
CHALLENGER 09-10 Fuel Injector; 3.5L
CHARGER 06-10 Fuel Injector; 2.7L and 3.5L
JOURNEY 09-10 Fuel Injector; 2.7L
JOURNEY 09-10 Fuel Injector; 3.5L
MAGNUM 05-08 Fuel Injector; 2.7L and 3.5L
NITRO 07-11 Fuel Injector; 4.0L
PACIFICA 05-06 Fuel Injector; 3.5L
PACIFICA 07-08 Fuel Injector; 4.0L
SEBRING 04 Fuel Injector; Conv, 2.7L, from 07/30/03
SEBRING 04 Fuel Injector; Sdn, 2.7L, from 07/30/03
SEBRING 05 Fuel Injector; Conv, 2.7L
SEBRING 05 Fuel Injector; Sdn, 2.7L
SEBRING 06 Fuel Injector; (Conv, Sdn), 2.7L
SEBRING 07 Fuel Injector; (Sdn), 2.7L
SEBRING 07 Fuel Injector; (Sdn), 3.5L
SEBRING 08-10 Fuel Injector; (Conv, Sdn), 2.7L
SEBRING 08-10 Fuel Injector; (Conv, Sdn), 3.5L
STRATUS 04 Fuel Injector; Sdn, 2.7L, from 07/30/03
STRATUS 05 Fuel Injector; Sdn, 2.7L
STRATUS 06 Fuel Injector; (Sdn), 2.7L
TOWN & COUNTRY 08-10 Fuel Injector; 4.0L

Mar 04, 2014 | 2007 Chrysler Pacifica Touring

1 Answer

Fuel injectors


For jeep grand Cherokee fuel injectors replacing, i suggest you to go the help oink provided below:-----

Its a complete step by step procedure to do so:-----


Fuel Injector Replacing Jeep Grand Cherokee

http://www.howtorepairguide.com/2012/11/fuel-injector-replacing-jeep-grand.html
-------------


How to Replace a Fuel Injector
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-fuel-injector.html-----------

How to Test and Replace Fuel Injectors on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-test-and-replace-fuel-injectors.html
------------

How to change fuel injector on 2005 gmc envoy?
http://schematicsdiagram.blogspot.in/2012/03/how-to-change-fuel-injector-on-2005-gmc.html
------------These will help.Thanks.

Nov 28, 2012 | 2002 Jeep Grand Cherokee

2 Answers

Po261, po267, po270, po273, po276 po279


P0261 Cylinder I Injector Circuit Low P0270 Cylinder 4 Injector Circuit Low P0273 Cylinder 5 Injector Circuit Low P0276 Cylinder 6 Injector Circuit Low P0279 Cylinder 7 Injector Circuit Low this will hold true for each code you listed SymptomsPossible sumptoms of OBD code P0279
- Engine Light ON (or Service Engine Soon Warning Light) - Engine Misfire - Engine Run Rough - Low MPG CausesPossible causes of OBD code P0279
- Fuel Injector #7 - Faulty or Corroded Fuel Injector #7 Connector - Plugged #7 Fuel Injector - Dirty #7 Fuel Injector Possible Solutions- Clean Fuel Injector #7 Connector - Clean Fuel Injector #7 - Replaced Fuel Injector

May 31, 2011 | Ford F-250 Super Duty Cars & Trucks

1 Answer

Number one injector came loose in 2001 toyota avensis d4d, removed injector pipes, wiring on injectors and rocker cover, tightened down injector, rebuilt and is now down on power.


REPLACE THE FUEL INJECTOR CANT REBUILT IT.IF YOU REMOVE FUEL INJECTORS FUEL RAIL YOU HAVE TO REPLACE GROMMETS AND O RINGS ON ALL THE FUEL INJECTORS IF NOT YOU WILL HAVE A INTAKE LEAK AT THE OLD FUEL INJECTORS SEALS.REPLACE THE FUEL INJECTOR YOU REBUILT THEY HAVE TO BE REPLACED.

Mar 02, 2011 | Toyota Camry Cars & Trucks

2 Answers

I need to replace the #2 fuel injector. Is this something a layman such as I can accomplish?


You could do it, but remember gasoline is flammable and volatile and can be hazardous to work with: REMOVAL AND INSTALLATION 1.9L Engines
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Properly relieve the fuel system pressure.
  3. Remove or disconnect the following:
    • Negative battery cable
    • Fuel rail
    • Fuel injector retaining clip off the injector
    • Fuel injector
    • Fuel injector O-rings and discard them Fig. 1: Fuel injector identification-1.9L engine 9306zg58.gif
    To install: NOTE: The SOHC and DOHC fuel injectors are not interchangeable. The injectors are identified by a color coded plastic ring near the bottom of the injector. The SOHC injector has a blue ring near the O-ring that mates to the intake manifold and the DOHC has a pink ring.
  4. Lubricate the new fuel injector O-ring with clean engine oil.
  5. Install or connect the following:
    • New O-ring seals on the fuel injector
    • Retaining clip to the fuel injector
    • Fuel injector to the fuel rail
    • Fuel rail
    • Negative battery cable
  6. Start the vehicle and check for leaks, repair if necessary.
2.2L and 3.0L Engines
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Properly relieve the fuel system pressure.
  3. Remove or disconnect the following:
    • Negative battery cable
    • Fuel rail
    • Fuel injector retaining clip off the injector
    • Fuel injector
    • Fuel injector O-rings and discard them
Fig. 2: Remove the retainer clip from the fuel injector - 2.2L and 3.0L engines 9306zg59.gif
To install:
  1. Lubricate the new fuel injector O-ring with clean engine oil.
  2. Install or connect the following:
    • New O-ring seals on the fuel injector
    • Retaining clip to the fuel injector
    • Fuel injector to the fuel rail
    • Fuel rail
    • Negative battery cable
  3. Start the vehicle and check for leaks, repair if necessary.
prev.gif next.gif

Feb 14, 2011 | 1999 Saturn SL

1 Answer

1996 4.3 vortec S10. Cranks wont start when engine/ outside temp is cold. Have used starting fluid,will start and run rest of day. Fuel pmp is cycling relay is working,needed a tune up I replaced all...


The plenum shouldn't be damp with gas. Is it a throttle body fuel injection system?

Could be a leaky injector.

Fuel Meter Body & Fuel Injectors (4.3L Engine) Removal & Installation 1995-2002 Models (RPO L35) To Remove:
4.3L (RPO L35) Fuel meter body assembly gm_trk_sil15_02-04_43_fuel_metr_body_assy.gif

  1. Before servicing the vehicle, refer to the Cautions and Warnings in the beginning of this section
  2. Remove or disconnect the following:
    • Upper intake manifold (See: Upper Intake Manifold)
    • Fuel meter body
    • Injector retainer lock nuts (J) and retainer (K)
    NOTE: Use care in removing the fuel injectors to prevent damage to the electrical connector terminals. The fuel injector is serviced as a complete assembly only. Also since the injectors are electrical compartments, these injectors should not be immersed in any type of liquid solvent or cleaner as damage may occur. Fuel injector cleaning is not recommended.
  3. While pulling the poppet nozzle tube downward, push with a small tip punch down between the injector terminals until the injector is removed
To Install:
4.3L (RPO L35) Fuel meter body assembly gm_trk_sil15_02-04_43_fuel_metr_body_assy.gif

Note: When ordering new fuel injectors, be sure to order the correct injector for the application being serviced.
  1. Lubricate the new injector O-ring seals with clean engine oil.
  2. Install or connect the following:
    • Fuel injector (L) into the fuel meter body injector socket
    • Retainer (K) and injector retainer lock nuts (J) and tighten the nuts
      1. Torque to: 27 inch lbs. (3 Nm)
    • Fuel meter body
    • Upper intake manifold (See: Upper Intake Manifold)
  3. Test drive the vehicle to confirm the repairs.
1993-2005 Models (RPO LU3) To Remove:
4.3L (RPO LU3) Fuel meter body assembly gm_trk_sil15_02-04_43_rpolu3_fuel_metr_body_assy.gif

  1. Before servicing the vehicle, refer to the Cautions and Warnings in the beginning of this section.
  2. Remove or disconnect the following:
    • Upper intake manifold (See: Upper Intake Manifold)
    • Fuel meter body
    • Injector retainer lock nuts (J) and retainer (K)
    NOTE: Use care in removing the fuel injectors to prevent damage to the electrical connector terminals. The fuel injector is serviced as a complete assembly only. Also since the injectors are electrical compartments, these injectors should not be immersed in any type of liquid solvent or cleaner as damage may occur. Fuel injector cleaning is not recommended.
  3. While pulling the fuel injector downward, push with a small tip punch down between the injector terminals until the injector is removed
To Install:
Note: When ordering new fuel injectors, be sure to order the correct injector for the application being serviced.
  1. Lubricate the NEW injector O-ring seals with clean engine oil
  2. Install or connect the following:
    • Fuel injector (L) into the fuel meter body injector socket
    • Retainer (K) and the injector retainer lock nuts (J) and tighten the nuts
      1. Torque to: 27 inch lbs. (3 Nm)
    • Fuel meter body
    • Upper intake manifold (See: Upper Intake Manifold)
  3. Test drive the vehicle to confirm the repairs

Jan 29, 2011 | 1996 Chevrolet S-10 Pickup

1 Answer

Fuel injectors,ineed tochange fuel injectors,mercedes benz E270cdi


Best Practices
  • Using lower quality gasoline can result in recurring fuel injector problems, even after a fuel injector replacement.

  • Fuel injector seals should always be replaced along with fuel injectors.

Common Symptoms
  • Failing fuel injectors can cause engine misfiring and hesitation. The Check Engine Light may come on and set diagnostic trouble code(s).

Jan 14, 2011 | 2005 Mercedes-Benz E-Class

2 Answers

After removing the fuel injectors and rail to remove the manifold, how do you reinstall the fuel injectors?


the same way you took it apart. put a little grease around the rubber seals so they will slide in easier. just tap on the fuel rail while lightly tapping it into place.

Mar 28, 2010 | 2002 Honda Passport

1 Answer

How to replace the fuel injectors on a 2002 Tahoe?


To Install:
  1. Lubricate the NEW fuel injector O-rings with clean engine oil.
  2. Install the O-rings on the fuel injector.
  3. Install a NEW retainer clip on the fuel injector.
  4. Install the fuel injector in the injector socket with the electrical connector facing outward. The retainer clip locks onto a flange at the fuel rail injector socket.
  5. Install the fuel rail.
NOTE: Use care in removing the fuel injectors in order to prevent damage to the electrical connector pins on the injector and to prevent damage to the nozzle. Service the fuel injector as a complete assembly only. The fuel injector is an electrical component. DO NOT immerse the fuel injector in any type of cleaner.

Mar 29, 2009 | 2002 Chevrolet Tahoe

Not finding what you are looking for?
2002 Dodge Stratus Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...