Question about 1999 Plymouth Grand Voyager

1 Answer

Transmission My van will be in drive and won't move for a second. I recently heard a pop while drive and the van instantly deccelarated and came to a stop it was still in drive and would not move when I press on the gas

Posted by on

  • yadayada
    yadayada May 11, 2010

    u are going to have to have a trouble code test to see if anything shows up, if not then the trans has failed and will have to be overhauled.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 409 Answers

The dreaded 606 transmission. Sounds like you broke something internally. I'd get it to a transmission shop that I trusted and have them check it. You might want to also check the axle shaft on both sides and make sure one of them didn't shell out.(come apart)

Posted on Jan 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

-17 degrees centigrade started van drove in reversed for 10 seconds after which van would not move with engine idling and transmission in gear move transmission lever to drive van would not move. Move...


Most likely in this severe weather the fluid and the bands in the transmission need time to circulate and warm up. It is a good idea in severe weather to allow a vehicle to warm up for at least 4 - 6 minutes before driving it. Remember that oils and lubricants get very thick in cold weather.

Jan 03, 2014 | Cars & Trucks

2 Answers

Transmission won't work


RAN IT WITH NO OIL SOME THING FAILED IN SIDE. ALL SO MAKE SURE YOU FILL IT MAY TAKE UP TO 10 QUARTS OF OIL

Feb 21, 2013 | Chevrolet Suburban Cars & Trucks

1 Answer

The gear selector on my 2002 Ford Windstar moves, but the transmission won't go into gear. Why is the transmission not going into gear?


try to replace transmission strainer first torque convertor and see if that helps if not it probabaly the transmission

Jan 31, 2013 | Cars & Trucks

1 Answer

Chrysler van won't go forward or revers


Im having the same problem as you. First thing is, If it was a valve popping it would make the noise when started not only when in reverse. Secondly, the vehicle is starting so its not the battery, if it were clicking from the battery it would mean the van wouldnt start and it would be clicking when it tries to turn over.

Nov 05, 2012 | 1998 Chrysler Town & Country

1 Answer

Hi, I have a 1999 Mercury Villager with the 3.3 Litre Nissan motor. Just recently my cousin replaced the timing belt, and distributor. When we got the van back it was having transmission problems. When you...


I would start by making sure the Trans Fluid level is correct. If the level is good, it sounds like your internal pressures are leaking down, and that is why it slips out of gear. Which means you have internal trans issue which would require the trans to be most likely removed and repaired.

Thanks Jay!

Jul 09, 2011 | 1999 Nissan Quest

1 Answer

My 2000 Sable won't move though gear selector appears to be in tack. Was making a left turn heard a loud pop on the right front side of the car then what appeared to be a rubbing or scraping noise...


the problem has to be in the linkage inside the transmission which means that you have to take into a mechanic to have them fix this because if you do not know how to take the transmission apart yourself is the reason why to take it to the nearest mechanic. Sorry

Jun 09, 2011 | 2000 Mercury Sable

1 Answer

Transmission made a loud pop then quit moving in drive. Truck still moves in reverse


An automatic transmission consists of a series of bands (gears) which is each gear within the transmission. You state that truck will move in reverse, but not in drive. The loud pop you heard was the forward gear band breaking. From this point you have two options...either have the transmission rebuilt or replaced.

Jun 11, 2010 | 1992 Dodge Dakota

1 Answer

I heard a loud pop, then the vehicle wont move in any gear.It then grinds when I try to put it in park.


It sounds like you broke a Constant Velocity joint (CV Joint). The pop was probably the joint breaking. When you put it in gear it's just spinning. Think of one of your hands as the transmission. Hold a pencil that would be the CV Joint(s) and axle, and use the other hand to hold the other end of the pencil. That's the front hub (part that makes the wheel turn). So you have ...hand, pencil...hand = trans, axle... wheel. If you hold the pencil firmly with both hands, and spin the pencil with one, both hands still move.

If the pencil breaks...the one not spinning does nothing.

So...The transmission is trying to make the van go, but the cv joint is broken, so the wheels aren't spinning. When you put the van in park, the transmission doesn't know the vans not moving. Therefore it's making the same noise as if you put the van in park while driving. If you must start the van and put it in gear to see if the driver's or passenger's axle is just spinning. Shut the van off, wait a minute for the axle shaft to stop spinning, and then put it in park.

Oct 02, 2009 | 1995 Mercury Villager

2 Answers

Loss of steering


Obviously in both cases some part of the steering linkage broke off (steering shaft, pitman arm, idler arm, tie rod or tie rod end... etc... Could be a number of things, depending on the location of the broken part) In the second case (still had steering for 2 days), that was just a streak of luck and the broken part stayed in place just enough one way or another for a few more days.

Jan 13, 2009 | 2000 Ford Econoline

Not finding what you are looking for?
1999 Plymouth Grand Voyager Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...