Question about 1997 Toyota Camry
How do you change/remove the plug wires on a 97' 6cyl. camery
Some Vehicles Are Equipped With A V-Bank Cover Remove The Three 5mm
Cap Nuts To Gain Access. Also It Has A Fastener For The V-Bank Cover
This Can Be Screwed Off As Well Then On Installation It Pushes Back On. On V-6 Models You May Need To Remove The 10mm Retaining Bolt From The Coil Pack Cover.
On The Engine End To Release The Locking Claw Use A Small Screwdriver Or Alike. Then Grasp Boot Not Wire And Twist As You Pull.
Please Take Caution And Do Not Have The Vehicle Running Cause They Can Give You A Pretty Good Shock. Also Replace Them One At A Time So You Don't Risk Mixing Them Up.
I Hope This Helps And Good Luck.
If You Have Any Questions Let Me Know
Posted on Jan 09, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 30, 2012 | 2004 Toyota Camry
Nov 17, 2011 | 1997 Toyota Camry
Jul 12, 2011 | 1991 Toyota Camry
Jan 10, 2011 | 1997 Buick Skylark
Nov 08, 2009 | 1997 Toyota Camry
May 17, 2009 | 1994 Toyota Camry
Mar 23, 2009 | 1995 Toyota Camry
Feb 09, 2009 | 1997 Toyota Camry
54 people viewed this question
Usually answered in minutes!