Question about 1992 Chevrolet Lumina

2 Answers


Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First you have to remove the support bracket. Remove the two plastic body clips that holds the washer fluid reservoir. Disconnect the negative battery terminal followed by the positive battery terminal. Last, remove the bolt that holds the bracket for the battery. You will need a six inch extension or longer for this. remove the plate that holds down the battery and lift the battery out. To install reverse the process

Posted on Feb 01, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

WHAT IS THE TRICK TO - 0900823d8004fd1f.jpg

  • Loosen the battery negative terminal clamp.

  • Use a terminal clamp puller to remove the negative cable.


  • Loosen the battery positive terminal clamp.

  • Use a terminal clamp puller to remove the positive clWHAT IS THE TRICK TO - 0900823d8004feae.jpg>0900823d8004feae.jpg

    • Remove the battery hold-down harWHAT IS THE TRICK TO - 0900823d8004feaf.jpghields.


      WHAT IS THE TRICK TO - 0900823d8004a233.jpgove the battery from the tray.


    • Install the new batteWHAT IS THE TRICK TO - 0900823d8004fd23.jpg
    • Also install the hold-down hardware.


    • Install the positive battery cable.
    • Then install the negative cable.
    • When installing a battery, be careful to observe the correct polarity. Reversing the cables destroys the diodes. Proper polarity must WHAT IS THE TRICK TO - 0900823d8004feb2.jpgn connecting a booster battery, positive to positive and negative to ground.


    Art courtesy of Delmar - Thomson Learning.
    • Coat the terminals with corrosion preventative spray, then check the job by starting the car.

Posted on Jan 09, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Battery new over night goe,s dead 1996 Chevy lumina

I would suggest getting a muleteer with a 10amp current option. Pull all the fuses and relays. Disconnect the negative battery cable and place the multimeter inbetween the negative battery post and the negative cable. You may get a small amp draw for the computer. Start replacing the fuses and monitor the amp draw. If you have an excessive draw when you first connect, it probably is an alternator issue.

good luck.

Jan 04, 2014 | 1992 Mitsubishi Eclipse

1 Answer

My 1992 lumina will idle just fine and when u drive it and come to a stop or slow down it will die but it will start right back up

sounds like you have an I.A.C issue. Idle air control problem. I would recommend replacing the I.A.C motor

Jan 28, 2011 | 1992 Chevrolet Lumina

1 Answer

1992 lumina starter replacement

well, you need jack stands unless you can do it from the top.. unhook your battery then undo the 2 or 3 bolts holding starter, then unhook 2 power wires on starter, make sure wires go back where they came from, or you mite be doin it again...

Jan 31, 2010 | 1992 Chevrolet Lumina

1 Answer

My Battery Died

and it wil be with a 14mm retaner bolt all you have to do loosen it an remove the cables an take out he battery

Jan 31, 2010 | 1992 Chevrolet Lumina

2 Answers

What size tires are on it

Original Equipment Sizes for 1992 Chevrolet Lumina Original Equipment Size: 195/75-14

Optional 15" Sizes for 1992 Chevrolet Lumina Optional 15" 205/70-15

Good luck hope this helps

Jan 12, 2010 | 1992 Chevrolet Lumina

1 Answer

Dash lights won't turn off 1992 lumina

i have the same problem with my mothers 92 chevy lumina euro try pumping your brake pedal down may sound weird but that turns them off and on in my mothers car i think there is a electrical fault in the car itself possibly faulty ignition wiring is what im thinking now

Sep 25, 2009 | 1992 Chevrolet Lumina

1 Answer

Replacing the brake line on a 1992 chevy lumina

Have it done by a pro because any connections have to be double flared, then the brakes have to be bled.

Aug 11, 2009 | 1992 Chevrolet Lumina

1 Answer

What is the standart battery for 1992 Chevy Lumina?

type 75 battery availible at any auto parts or department store that sells batteries

Jul 07, 2009 | 1992 Chevrolet Lumina

1 Answer

Replace starter motor on a 1992 Chevy Lumina LS

First make sure you have enough clearance to work on the vehicle you may need a jack or jack stands. Then make sure your tires are blocked and emergency brake is on then disconnect the battery. Theres two bolt securing the starter to the engine block and two wires running from the battery to the starter. take the wires off and when your ready reverse the steps........

May 01, 2009 | 1992 Chevrolet Lumina

1 Answer

1992 Lumina won't start

  1. try to tighten the wire connected to battery.
  2. check the battery if it is still full charge.
  3. make sure that your alternator is in good condition.

Apr 27, 2009 | 1992 Chevrolet Lumina

Not finding what you are looking for?
1992 Chevrolet Lumina Logo

Related Topics:

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides