Question about 2000 Daewoo Lanos
What is the torque on the head bolts
The 2000 daewoo lanos 1.6L dohc head torque is as follows , step 1 = 18 ft. lbs. , step 2 = 70 degrees , step 3 = 70 degrees , step 4 = 30 degrees . sequence is as pictured .
there ya go , gears to the left , looking at the front of engine .
Posted on Jan 09, 2009
The right rear spindle shaft is bent on my 2000 Daewoo Lanos none of the online store ever heard of a spindle or they only offer the spindle nut Am I calling the part by the wrong name
Posted on Nov 13, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Whether working on a 1.6- or 1.8-liter engine, the torque specifications are the same.
Intake and Exhaust Manifolds
and i,m sorry i cant seen to remember the order
Posted on Oct 21, 2011
SOURCE: one time use head bolts???????
Look at the cap of the bolt,there should be a number there,generaly 8.8 to 10.9,but as high as 12.9,the higher the number the higher the stength,if you have a high stregnth head bolt,they should be safe to re-use,check the threads for any distortion or stretching,make sure there is no debris in the threads and lightly oil them before you install so you can get an accurate torque reading.If your unsure call the local parts store and ask,they generally have this information.Hope this helps,and good luck.
Posted on Apr 18, 2009
Tips for a great answer:
Nov 27, 2016 | 2000 Daewoo Lanos
Aug 05, 2014 | 2000 Daewoo Lanos
Sep 19, 2013 | 1996 Saturn SL
Oct 29, 2012 | 2001 Honda Accord
Aug 24, 2012 | Chevrolet S 10 Cars & Trucks
Oct 20, 2011 | 2000 Daewoo Lanos
Since you didn't say which engine you have, I've pulled torque specs for 3 different engines. Also, since I can't include a diagram showing the relative locations of the numbered head-bolt locations, it would be a good idea for you to purchase a vehicle specific repair guide that will show this info.
Take particular note about the TTY (Torque to Yield) bolts used on 2 of the 3 engines shown. It is said that new head bolts MUST BE USED when head is replaced or re-installed to obtain the proper torque.
B2500 4 Cylinder
Torque sequence: --------- ' 10 6 2 4 8
' front ' ' ' 7 3 1 5 9 ' -----------Step 1: torque in sequence to 51
Ft/Lbs Step 2: torque again in sequence to 51 Ft/Lbs Step 3: final
tighten all bolts an additional 90 to 100 degrees recheck final
torque in sequence *** CAUTION ***engine uses Torque To Yield head
bolts (TTY) that permanently stretch during the initial installation.
New head bolts must be used when cylinder head is replaced or
re-installed to obtain proper torque.
B3000 3.0 6 Cylinder
Torque sequence ---------- ' 6 4 2 8 '
' ' ' 5 1 3 7 ' ---------- Step 1: torque to 59 Ft/Lbs Step 2: loosen
in sequence (1) full turn Step 3: torque to 41 Ft/Lbs Step 4: torque
to 73 Ft/Lbs
B4000 4.0 6 Cylinder
Torque sequence --------- ' 5 1 3 7 ' '
' ' 6 4 2 8 ' --------- Step 1: torque cylinder head bolts in
sequence to 26 Ft/Lbs Step 2: torque cylinder head bolts to 56 Ft/Lbs
Step 3: turn cylinder head bolts in sequence an additional 90-degrees
recheck final torque in sequence *** CAUTION ***engine uses Torque To
Yield head bolts (TTY) that permanently stretch during the initial
installation. New head bolts must be used when cylinder head is
replaced or re-installed to obtain proper torque.
Good luck with this job!
Feb 06, 2011 | 1998 Mazda Pickup
Nov 26, 2010 | 2004 Chevrolet Impala
Nov 16, 2010 | 1997 Chevrolet Cavalier
May 12, 2010 | 1998 Toyota Sienna
2,993 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: