Question about 2006 Dodge Charger

1 Answer

Need to replace turn signal housing 06 Charger

My drivers side front turn signal got hit and busted out the plastic. I have a complete replacement housing for it but dont know how to remove the old one to replace it with the brand new one. Can anyone help???

Posted by on

  • 1 more comment 
  • USAF1973 Jan 09, 2009

    Yes i still need help, it was just posted at 8:25pm 8 Jan 09.

  • USAF1973 Jan 09, 2009

    Yes i still need help, it was just posted at 8:25pm 8 Jan 09.

  • USAF1973 Jan 10, 2009

    No i haven't i purchased the replacement online but it did not come with any method of installation.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 448 Answers

Is this still open

Posted on Jan 09, 2009

  • bob collins
    bob collins Jan 09, 2009

    Have you been to your autoparts store? They can usually print out an exploded version for you to take home

  • bob collins
    bob collins Jan 10, 2009

    Matters not. Either the auto parts store or the dealership can print it out for you

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal light right flash


flasher/blinker is busted. this is located under your dash board. remove steering column cover, turn on LEFT turn signal (yes, the one that is working), then you will hear a clicking sound. locate the relay that causes the sound. there you can see 2 relays (one for LEFT, other one for RIGHT turn),replace busted one.

Jun 11, 2013 | 2002 Toyota Tundra

1 Answer

Change turn signal bulb 2008 srx


Front turn signal bulb replacement 2008 SRX . Jack up car & block . Remove front wheel & front half of the wheel house assemble. There are about 7 plastic pull rivets that have to be removed . Pull out the wheel house . Remove turn signal & driving light cover held on by 6 # T10 torx screws . Twist out socket & replace bulb # 3757NAK . Should take about 45 min.

Mar 26, 2012 | 2006 Cadillac SRX

1 Answer

How to change the globe to the headlight of my Kia Pregio GS 2005 van


To replace headlight bulb of kia pregio van: You only need Phillips screw driver and 10mm socket or open wrench. Open the hood, remove front grill with 4 phillips screw. This will give you room for your hand to pull out the headlight housing later on. Next is remove the signal light housing by unscrewing the phillips screw on top of the headlight housing then pull out the signal light housing and remove the bulb. You will see 2 pcs 10mm bolts on the side which hold the headlight. Loosened and remove the bolts on headlight holder then pull the headlight sideward. Remove power supply socket before removing it completely from the van. Remove bulb socket, spring clip, and busted bulb and replace with new one. Reassemble the disassembled parts in reverse order. That's it, will take you only 10 minutes.

May 27, 2011 | Kia Rio Cars & Trucks

1 Answer

How to change front driver side turn signal bulb in a 98 Lexus es 300.


This may be right.I got this third hand.. works on later models. Above the area of the turn signal there will be a piece of black plastic that extends from the left side of the front of the car to the right. In this case if its the driver side pull up the plastic tab holding down the plastic strip in front of the battery directly above the headlight and lift it up. This will expose a screw that retains the front signal/driving light housing. Remove screw and carefully slide housing forward. Once out remove bulb and replace. This should only take 5 minutes, works on either side

Apr 07, 2010 | 1998 Lexus ES 300

2 Answers

Tail lights work on both sides. turn signal and


Sounds like you need to replace the drivers brake/tail light.

Dec 14, 2009 | 1998 GMC Sierra

2 Answers

Need replace turn signal bulb


YOU HAVE TO THE FRONT HEADLIGHT HOUSING TO REPLACE THE TURN SIGNAL BULB.

Aug 24, 2009 | 1996 Chevrolet Cavalier

1 Answer

Removing turn signal assembly on 2002 Ford Escort


you can purchase some very cheap plastic trim tools at harbor freight tools to complete the job.use tools to pry between body of car and plastic turn signal assembly,try using a flashlight to locate the clips holding it to body

Jun 15, 2009 | 2002 Ford Escort

1 Answer

How to replace front turn signal bulb


its easy. when the sinal flashes fast its just telling you a light is out. there might be 2 ways to fix this. open the truck look for the housing for the lights. now you may have to just turn the harnest where the wires are. or you just nee a phillps screw driver and unscrew the plastic cover off.

May 14, 2009 | 1998 Chevrolet Cavalier

4 Answers

Replacing front turn signal bulb on 2006 Cadillac SRX


wow i feel sorry for you because Cadillac designed this bulb to be a don't get to bulb but OK here's what you do take the bottom cover off or skid plastic panel under neath the front end theirs little plastic clips holding it on just get come dikes and don't cut them but just use it to help pull them out. after you get that off use a flash light and locate your light housing you should see two screws holding the house in i think those screws are 8mm i cant remember remove those two screws and be careful the metal from the bumper cuts you pull the light housing out and remove all the screws around the housing and open the housing up replace the bulb and make sure your contact to the bulbs clean and then reassemble the way you took apart. if you cant get it well then best bet is take it somewhere i know Cadillac charges an arm and a leg so you can go somewhere else.

Nov 13, 2008 | 2004 Cadillac SRX

Not finding what you are looking for?
2006 Dodge Charger Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...