Question about 1998 Isuzu Rodeo

1 Answer

Serpentine belt install 2001 isuzu rodeo 2wd 4cylinder auto

No diagram and no instructions on how to work the tensioner. HELP!!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

I believe that you need a 14MM or 15 MM wrench a long one would be the best since the spring is hard to move. There should be a nut on the tensioner pully #6 on the picture below. This is where you need to move the tensioner with one hand and pull the belt off with the other. It might be easier with 2 people. Remember the belt routing it will help when installing the new belt. Good luck.

Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Isuzu serpentine belt routing diagram for 6VE1, 6VD1, Rodeo, Trooper and Axiom...


Serpentine belt routing diagram for an Isuzu V6 cylinder engine. 6VE1, 6VD1 as fitted to Rodeo, Trooper and Axiom
4b4418d.jpg

  1. Crankshaft pulley
  2. Tensioner
  3. Alternator
  4. Idler pulley
  5. Power steering
  6. Airconditioning compressor
  7. Cooling fan pulley

on Sep 07, 2010 | Isuzu Trooper Cars & Trucks

1 Answer

Need diagram of serpentine belt for 2003 isuzu rodeo


go into auto zone and they will print you a copy of how to install the serpentine belt with pictures

Jun 18, 2011 | 2003 Isuzu Rodeo

1 Answer

I need diagram for serpentine belt for 2001 Isuzu Rodeo v6


Look under the hood or in your owner's manual. Many manufacturers place the belt diagram on the underside of the hood, on the strut housing, or near the front of the engine.

Jan 04, 2011 | 2001 Isuzu Rodeo

1 Answer

Need a diagram on how to in stall a serpentine belt on a 99 isuzu rodeo v6 with air conditioning


Remove the upper radiator shroud. Remove the fan by undoing the 4 bolts that hold it to the water pump. Using a wrench turn the tensioner pulley hex nut to release tension on the belt. Remove the belt and replace with a new one. Refer to diagram for routing detail. http://www.fixya.com/support/r5914885-isuzu_serpentine_belt_routing_diagram

Sep 07, 2010 | 1999 Isuzu Rodeo

1 Answer

I have a 3.2L V6 need help with serpentine belt replacement. Need a diagram for it.


2001 ISUZU RODEO - V6 3.2L 3165cc GAS FI N W 6VD1

7260662.jpg

Hope helps (remember rated this).

Jun 08, 2010 | 2001 Isuzu Rodeo

1 Answer

Need drive belt routing for 1999 rodeo 3.2


Click on the following: free, direct Link. It has several Diagrams including the Serpentine and Drive Belt Diagram for your 1999 Isuzu Rodeo 3.2L DOHC V6 Engine with Engine Options (AC/No AC etc.). It also has Instructional and Directional Diagrams that will help you.

http://www.2carpros.com/car_repair_information/year/1999/make/isuzu/model/rodeo/1999_isuzu_rodeo_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Mar 21, 2010 | 1999 Isuzu Rodeo

1 Answer

Need diagram to install serpentine belt


Look at the pullies to see if they are smooth or if they have lines on then. The back side of the belt the ( smooth side) goes against the smooth pullies.The side with lines on it goes to the other pullies. Some vehicles have the diagran in the engine compartment. Under the hood or by the top of the radiater.

May 10, 2009 | 2001 Isuzu Rodeo

1 Answer

Changing serpentine belt on a isuzu rodeo 4x4


the tentioner is above the alternator

Jul 19, 2008 | 2001 Isuzu Rodeo

Not finding what you are looking for?
1998 Isuzu Rodeo Logo

829 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...