Question about 1996 Chevrolet Tahoe

1 Answer

We have a 1996 Chevy Tahoe. the actuator on the transfer case bad

The actuator on the transfer case is bad so we are trying to replace it so we removed the mounting assembly from the transfer case and now cannot figure out how to remove it from the housing. Thank you in advance for any help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can remove acuator buy turning it out like a light bulb.use a channel lock pliers.

Posted on Jan 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Chevy Tahoe liftgate not opening


You have likely got broken wires where they come out of the cab and into the liftgate. pull back the rubber and check them at that point.

Mar 27, 2015 | 1996 Chevrolet Tahoe

1 Answer

4x4 troubleshooting


This usually means the actuator isn't shifting in. If you look on the transfer case you will see an actuator, have someone hit the button while you have your hand on it, you should feel the solenoid react. If not check the connector for and bent or corridors terminals, if not I would unbolt the actuator and see if it works pulled out. It maybe the connection, actuator or the shift fork inside the transfer case. Good luck

Jan 01, 2014 | Cars & Trucks

1 Answer

My 05 Chevy 4 wheel drive will not engage, the light on the button just blinks, you can here it try to engage. I have replaced the switch and nothing happened.


Hi, the actuator for the 4X4 is bad . It should run around $50 for the part .. If you are mechanically inclined, you can switch it out . It is mounted on the transfer case and looks like a small starter. Before you replace check the fuse located on the drivers side door panel. You will see 4X4..fuse i believe 30 amp, replace the fuse and if it does not solve the problem then you have to change the actuator as i have said earlier....

Jul 22, 2011 | 2005 Chevrolet Tahoe

1 Answer

My 2004. Chevy trailblazer is stuck in 4L. I can't get the transfer case into anything else. There is no voltage change at the transfer case actuated.


you may have a bad switch or actuator is bad, try switching the gears and testing power at the actuator, the most common problem with this would be the switch and somtimes the actuator.

Dec 24, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

96 tahoe 4x4 not engaging the front wheels and the light in the dashboard for the 4x4 does not come on ethier but the transfer case does feel like in 4x4 mode


then the seloniod actuator if the front diff may be bad, this is common,heres a diagram to show you what it is and where it is, hope this helps.3e85522.gif

Jan 27, 2010 | 1996 Chevrolet Tahoe

2 Answers

I have a 2002 Chevy Tahoe making a grinding noise in the front drivers side wheel, what could this possibly be?


If 4wd Tahoe, it is the CV joint going out or is out, replace part about 250 bucks, very common in 4wd Tahoe

Jan 11, 2010 | 2000 Chevrolet Tahoe

2 Answers

Crackling noise from transfer case


What you may be hearing is the wheel bearings instead of the transfer case. I had this problem with GM before and found it to be the wheel bearing was bad. I know it is not what you think, but it would be an easy thing to check first.

Jun 21, 2009 | 1996 Chevrolet C1500

1 Answer

Removal of transfer case 1996 chevy tahoe


Fairly simple, 6 bolts, drive shafts,a few wires. Must go to the rear and then bring the front down and out

Dec 30, 2008 | 1996 Chevrolet Tahoe

2 Answers

I have a 97 chevy tahoe and the 4x4 wont lock in i just replaced the actuator and it just blinks on 4x4 . i do have 12 volts @ the harness to????


Your transfer case could be locked up. Try pulling the shifter motor (servo) off of the transfer case and manually shifting the vehicle into 4x4. Make sure to block the wheels as it will roll if you shift into neutral. If you cant shift it, you need to have a professional look at the insides of your transfer case.

Dec 22, 2008 | 1997 GMC Jimmy

Not finding what you are looking for?
1996 Chevrolet Tahoe Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...