Question about 1999 Dodge Caravan

2 Answers

Serpentine belt keeps popping off

1995 dodge caravan with 3.3l v6; serpentine belts pops off, in damp environment (raining outside).

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Check #1 engine main pulley is all the way in and tight

#2 belt align? ok , no , check carefully the serpintin is centered in all pulleys, and do not miss the water pump pulley, runs on the inside the bold and outer surface of belt (serpertine), there is a drawing at the engine bay

Posted on Mar 08, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 334 Answers

Check alignment of the belt and check the condition of the belt because once it comes off it will continue to come off because the strands in the belt are broken.

Posted on Jan 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belts comes off in damp weather


Make sure the plastic shield is not missing below the pulleys which keeps road debris and excess water off belt and pulleys. Also check that the alternator or power steering pump are not slightly out of alignment.

Apr 12, 2014 | 1994 Dodge Caravan

1 Answer

I need a timing belt diagram for a 1995 dodge caravan 3.3


The 3.3 L Caravan engine does not use a timing belt.. It is timing chain set up. What belt are you talking about that broke?? The serpentine belt that drives all the accessories??

Jan 30, 2013 | 1995 Dodge Caravan

2 Answers

2002 dodge grand caravan sport belt squeals when it rains


The serpentine belt tensioner is a spring loaded device that pulls the right amount of pressure to keep the belt for falling off, as well slipping.

This unit has a short life span, that of the belt, and in most cases it is recommended that it should be replaced at the same time as the belt.

I am 90% sure this is the issue.

I hope this helps

Dec 29, 2012 | 2001 Dodge Caravan

1 Answer

95 Grand Caravan se. Serpentine belt keeps coming off.


When did this first begin to happen? Changed belt or installed different pulley? Chased same problem. Solved it by shimming the idler pulley out so that belt ran in the middle of the pulley. Check the wear marks on the pulleys to see if the belts are running to the outside.

Dec 21, 2011 | 1995 Dodge Grand Caravan

1 Answer

How do i take of a pulley and tensioner of a 94 Dodge Caravan 3.0 L V6


You'll need a Serpentine Belt Tool and a socket set.

Rotate the Caravan's serpentine belt tensioner assembly clockwise to relieve the tension on the belt. Slip the belt off the tensioner with your free hand before rotating the tensioner back to its home position. Remove the tool.
Extract the two mounting bolts that hold the serpentine belt tensioner assembly to the Caravan's front engine cover using your socket set. Depending on your physical size and dexterity, you may find this easier to accomplish through the top of the engine well or through the passenger-side wheel well.
Pull the old serpentine belt tensioner assembly out of the Caravan's engine bay by hand. Place the new serpentine belt tensioner assembly on the Caravan's front engine cover and bolt it in using your socket set.
Rotate the new serpentine belt tensioner assembly clockwise with the serpentine belt tool and then place the belt on the pulley by hand. Rotate the new serpentine belt tensioner assembly back into place. Remove the tool and close the hood.

May 19, 2011 | Dodge Caravan Cars & Trucks

1 Answer

My serpentine belt popped off, so im trying to figure out how to put it back on


on top of radiator shroud there should white decal with the belt diagram
on it but before you do check the pullys make sure there are not any
loose bent or siezed ones that may have helped your belt pop off

Jan 11, 2010 | 2000 Dodge Caravan

3 Answers

Serpentine belt diagram for a 3,3l dodge dynasty with ac


For the 1991 DODGE DYNASTY - V6 3.3L 201ci GAS FI N R , review this informacion:

Belt Routing Diagram
- Multiple Accessory, w/o A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/o A.C. (Mfg. Before 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. Before 2/27/91)
684ce70.jpg


Remove the serpentine belt by using a breakover bar, rachet or serpentine belt removal tool with the correct size socket for the pulley mounting bolt. Rotate tensioner arm to release tension. Remove the belt.

Hope helped with this (remember rated this help) Good luck.

Nov 12, 2009 | 1991 Dodge Dynasty

1 Answer

Replace serpentine belt on 3.3 L 1995 Dodge grand


I go to the local parts store & buy a repair book for the vehicle for approx. $20, read the procedure in the book, gather the tools & parts required, replace the belt per the instructions

Oct 11, 2009 | 1995 Dodge Caravan

2 Answers

Serpentine belt keeps coming off


you probably need to chage the belt tensioner.

Dec 27, 2008 | 1998 Dodge Grand Caravan

1 Answer

Belts


depends on the engine...3.3 has 1 belt
3.0 has 2 belts a serpentine belt and an ac belt
2.5 has 3belts a waterpump belt an ac belt and a power steering belt

Nov 15, 2008 | 1995 Dodge Caravan

Not finding what you are looking for?
1999 Dodge Caravan Logo

446 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...