At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
TCM Transmission Control Module, passenger side, upper bay area, just befor strut, attached to frame rail,
PDC Power Distribution Center is on opposite corner, along with PCM Power-Train Control Module
ECM Engine Control Module is on driver side about midway of engine compartment attached to frame rail.
"Need to knowwhere the flasher location is on a 99 Ford Contour"
It is located or plugged into the side of the multi-function switch. If you remove the plastic covers from the steering column you will be able to replace the flasher.
In the OB=2 codes system p0715 refers to the turbine shaft speed (TSS) sensor --circuit malfunction===causes --wiring --TSS--ECM/TCM (TCM is the transmission control module). It all refers to the turbine shaft in the torque converter
Look under the left front wheel well you might have to take off the Wheel to get at it its forward of the wheel Stupid place to place to put it isnt it
this is the TCM (transmission control module) telling the PCM (powertrain control module) to turn on the check engine light due to a fault in the auto trans, the code for the fault is stored in the TCM, to get this cheched you need to have the dealer run a TCM fault code test.
×