Question about 2007 Mazda B4000

1 Answer

97 mazda truck wipers wont work

Truck parked by a tree. lighting strikes tree runs under truck.
now now every thing works but wipers. checked fuses and
relays . am getting fire to wiper motor. but wont do anything.
i got another motor still wont work. i can ground new motor
then put fire to it it will run. any help will be thankfull for.

thanks pete

Posted by on

  • mrford460 Jan 09, 2009

    thanks guru, i will try this tomarrow and let you know.

    thanks pete

  • mrford460 Jan 09, 2009

    thanks for the help. guru saved me a lot of trouble.

    thanks again pete



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Mazda Master
  • 79,865 Answers

The motor ground is controlled by a solid state control module called the GEM (Generic lectronic Module), it is most likey burned out by the voltage surge of the strike, it is behind the radio, about 2" square and black plastic case

Posted on Jan 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Wipers wont turn off with switch 97 f150

There are actually two relays , wiper Hi / low relay an wiper RUN/PARK relay. I would check the RUN/PARK one . Located in the battery junction box , left side engine compartment , relays 3 & 4

Oct 01, 2015 | Cars & Trucks

1 Answer

Running lights wont work, bulbs are fine.

are you sure you pushed the wire connectors fully home? the alarm probably is disarmed when key in ignition,otherwise it would trigger when you want to start vehicle.The only other thing with your lights there may be a relay for that particular circuit check in the workshop manual hope this helps

Mar 29, 2014 | 1996 Mazda Familia

1 Answer

97 mazda 626 wont shift from park. release button on side of shifter wont push in. removed knob, plastic rod in center wont move

The 1st thing you need to do is check the brake lights, if they are not wiorking the park lock solenoid doesn't get power and the park lock remains engaged.

Apr 17, 2012 | 1997 Mazda 626

1 Answer

'95 Lumina, wipers, park/running lights and instrument cluster light not working, any tips? All fuses are good, no power at wiper motor/module aasembly.

did you check under the hood on the drivers side for a box that contains fuses and relays, please check this area.

Mar 18, 2011 | 1995 Chevrolet Lumina

1 Answer

My 97 ford f 150 , the fuse number 7 under the hood alway gets burnt, my tail parking lights and dash light wont work,, i open the lights then boom the fuse burns out?? every thing else works but the...

There is a short somewhere in that power supply circuit. It is not going to be any fun to find and all you can do is inspect every inch of each wire.

Jan 29, 2011 | 1997 Ford F150 Regular Cab

3 Answers

My wipers stopped working, i dont hear the motor running when i go to turn them on either. the washer fluid still sprayes and none of the fuses are blown.

Hi sdy138, I know you said that none of the fuses are blown but did you check the METER FUSE in the passenger junction box? I assume that the passenger junction box is located under the dash on the passenger side, or behind the kick panel. If that fuse is good then it may be the high or low wiper relay. Hope this helps.

Please rate my advise.

Jan 13, 2011 | 2004 Mazda 3

1 Answer

Car wont start !!

the first idea is to look at the fuses in the fuse box after that there are relays to be found under the bonnet the relays should make a clunk when something is turned on say wipers hope this helps regards Jim

May 03, 2009 | 1999 Mazda 626

1 Answer

Daytime running lights and wipers wont work

Had the same problem with my 97 Jetta it turned out to be the ignition switch. No problems since

Sep 15, 2008 | 1997 Volkswagen Jetta

Not finding what you are looking for?
2007 Mazda B4000 Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides