Question about 1993 Oldsmobile Cutlass Ciera

1 Answer

Both turn signals have stopped working on my 1993 Olds Cutlass Su

Fuses are good, and both flashers were changed

Posted by on

  • 2 more comments 
  • kocayfamily Jan 08, 2009

    Where would I find the mutifunction switch to test it?

  • Anonymous Feb 01, 2009

    i have a 1990 olds cutlass ciera and my signal lights work if you do it manually but they will not work if you don't. They stay solid if you turn them on. Would like to know where the part is behind the dash where you can change the part. I have looked everywhere. I already have the new part but can't find where it goes.

  • yadayada
    yadayada May 11, 2010

    that is the same as the turn signal/highbeam/windshield wiper switch, hence the term multifunction.

  • yadayada
    yadayada May 11, 2010

    test the multifnction switch, it is the most common cause of this.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

You have to try the indicator relay.

Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 olds cutlass supreme both blinkers do not work. Emergency flashers do work. Looks like fuses are good


There may be separate flashers for the Emergency 4 ways vs. the turn signals left or right. Try to replace the flasher for the turn signals located under the dash on the driver's side. That's the way my 1990 Cadillac was, and it may be the case for you.

Feb 09, 2011 | 1988 Oldsmobile Cutlass

2 Answers

Where is the turn signal flasher on a 1993 olds


If not in fuse panel, take ash tray out, unscrew ash tray assembly and pull out. The flasher is on the right side of the ash tray right up front.

Oct 31, 2009 | 1993 Oldsmobile Cutlass Ciera

3 Answers

Hazard flashers do not work. Turn signals do. Changed relay. Nothing. Ugh. 1992 oldsmobile cutlass supreme


You changed the hazard flasher or the turn signal flasher? It has two, one for the hazard and one for the turn signals

Aug 31, 2009 | 1992 Oldsmobile Cutlass Supreme

1 Answer

Electronic flashers


For component locations you can go to autozone.com and they will give you a list of all of your cars components and there locations. It does sound like the flasher to me. Hope this helps.

Apr 03, 2009 | 1993 Oldsmobile Cutlass Ciera

1 Answer

1997 olds cutlass turn signals not working


If you haven't done so already, change both flashers that are mounted in the fuse box, the one for turn signals and the one for the 4 ways.
You might have a bad turn signal switch.

Mar 13, 2009 | 1997 Oldsmobile Cutlass

2 Answers

I need to locate and replace the multi function switch


My turn signal flasher was located to the right of the ash tray, I looked around the column for HOURS and it wasn't there... I also have an 93 oldsmobile cutlass ciera, it drove me crazy because the manual wasn't correct.

Feb 27, 2009 | 1993 Oldsmobile Cutlass Ciera

1 Answer

Both turn signals light, but do not blink


under the dash on the driver side there is a round or square sliver box that should say turn signal or flasher on it in the fuse box.

Feb 26, 2009 | 1993 Oldsmobile Cutlass Ciera

1 Answer

Turn signals don't work on my Olds 94 cutlass ciera


I think its under the hood in the main fuse panel, its a round 2 or 3 prong silver looking flasher switch about as big around as a half dollar, bout a inch thick.

Feb 24, 2009 | 1994 Oldsmobile Cutlass Ciera

3 Answers

Turning signals have quit flashing. bought a elecronic flasher but not a clue where it goes


I had to use a pair of vise grips on the receiver to get a good enough grip and pull the plug like heck. There is another flasher for the emergency flashers located to the right side of the glove box (glove box has to be removed) on the far side of the alarm box for "keys left in ignition"

Jul 25, 2008 | 1989 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1993 Oldsmobile Cutlass Ciera Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...