Question about 1994 Plymouth Voyager

1 Answer

How many bolts on my starter

I have a 94 starter thats bolted to the back of the engine thats really hard to get to...i need to know how many bolts do i need to take off

Posted by on

  • s60six May 11, 2010

    what engine does your van have?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,055 Answers

Three bolts the very top one you have too pull the passenger wheel and reach in with a long extension too too get too it

Posted on Jan 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Do you know where the 2 bolts are on a starter for a 94 olds cutlass ciera s?


REMOVE THE STARTER FLY WHEEL COVER. STARTER BOLTS IS VERTICAL BOLTED INTO THE ENGINE.

Jul 08, 2011 | 1994 Oldsmobile Cutlass Ciera

1 Answer

How to replace a starter on a 94' cutlass


3.1L Engines - 1988-94 VEHICLES
(see Figures 5, 6, 7 and 8)
  1. Remove the air cleaner and duct assembly.
  2. Disconnect the negative battery cable.
  3. Raise and safely support the vehicle.
  4. If equipped with an engine oil cooler, drain the engine oil, remove the oil filter and position the hose next to the starter motor to the side.
  5. Remove the nut from the brace at the air conditioning compressor, nut from the brace at the engine and the brace.
  6. Unfasten the retaining bolts, then remove the flywheel inspection cover.
zjlimited_919.jpg

Fig. 5: Unfasten the retaining bolts ...

zjlimited_920.jpg

Fig. 6: ... then remove the flywheel cover

  1. Remove the starter bolts and shims, if equipped. Do not let the starter hang from the starter wires.

zjlimited_921.jpg



Fig. 7: An extension may be needed to access the starter mounting bolts

zjlimited_922.jpg

Fig. 8: Remove the starter motor and any shims that may have been used

  1. Detach the starter wires from the solenoid, then remove the starter from the vehicle.
To install:
  1. While supporting the starter, connect the starter wires at the solenoid.
  2. Install the starter motor-to-engine mount with the shims, if equipped, and the mounting bolts. Tighten the bolts to 32 ft. lbs. (43 Nm).
  3. If equipped with an engine oil cooler, reposition the hose next to the starter motor, install the oil filter and refill the engine with the proper amount of engine oil.
  4. Install the flywheel inspection cover and tighten the bolts.
  5. Install the starter support brace to the air conditioning compressor and tighten the nut to 23 ft. lbs. (31 Nm).
  6. Carefully lower the vehicle, then connect the negative battery cable.
  7. Install the air cleaner and duct assembly.

Hope helps.

Mar 23, 2011 | 1994 Oldsmobile Cutlass Supreme

1 Answer

I bought a 91 gsr lancer with a 94 model 1.8 turbo engine that had to be wired up the starter motor bolts up but dont seem long enough what starter motor can i use


Use original starter motor, That is the correct way.If you think that bolts are not long enough use longer bolts or studs.

Feb 11, 2011 | 2002 Mitsubishi Lancer

2 Answers

Battery was checked out and it is fine. Alternator needs to be replaced. If we buy the part, how hard is it to replace.


I have pasted instructions below. You can judge for yourself the difficulty. The job takes about an hour for an average mechanic. Please let me know if you have questions.

2.8L and 3.1L Engines
1988-94 VEHICLES

  1. Remove the air cleaner and duct assembly.
  2. Disconnect the negative battery cable.
  3. Raise and safely support the vehicle.
  4. If equipped with an engine oil cooler, drain the engine oil, remove the oil filter and position the hose next to the starter motor to the side.
  5. Remove the nut from the brace at the air conditioning compressor, nut from the brace at the engine and the brace.
  6. Unfasten the retaining bolts, then remove the flywheel inspection cover.




86c305c.gif


Fig. Fig. 5: Unfasten the retaining bolts ...


e42226b.gif


Fig. Fig. 6: ... then remove the flywheel cover

  1. Remove the starter bolts and shims, if equipped. Do not let the starter hang from the starter wires.

47287fe.gif


Fig. Fig. 7: An extension may be needed to access the starter mounting bolts


          365fedd.gif

          Fig. Fig. 8: Remove the starter motor and any shims that may have been used

          1. Detach the starter wires from the solenoid, then remove the starter from the vehicle.
          To install:
          1. While supporting the starter, connect the starter wires at the solenoid.
          2. Install the starter motor-to-engine mount with the shims, if equipped, and the mounting bolts. Tighten the bolts to 32 ft. lbs. (43 Nm).
          3. If equipped with an engine oil cooler, reposition the hose next to the starter motor, install the oil filter and refill the engine with the proper amount of engine oil.
          4. Install the flywheel inspection cover and tighten the bolts.
          5. Install the starter support brace to the air conditioning compressor and tighten the nut to 23 ft. lbs. (31 Nm).
          6. Carefully lower the vehicle, then connect the negative battery cable.
          7. Install the air cleaner and duct assembly.


          3.4L Engine

          See Figures 10 and 11
          1. Disconnect the negative battery cable.
          2. Remove the engine oil cooler assembly. For details, please refer to the procedure located in Engine & Engine Overhaul of this repair guide.
          3. If equipped with an automatic transaxle, unfasten the flywheel inspection cover bolts, then remove the cover.
          4. Detach the electrical connections from the starter.
              d01a195.gif
                              Fig. Fig. 10: Detach the starter electrical connections ...


                              db7fe98.gif

                                Fig. Fig. 11: ... then unfasten the retaining bolts and remove the starter from the vehicle

                                1. Unfasten the starter motor retaining bolts, then remove the starter.

                                To install:

                                WARNING Before installing the starter to the engine, make sure the electrical terminals are secure by tightening the nut next to the cap on the solenoid battery terminal. If this terminal is not tight, starter damage may occur.

                                1. Secure the electrical terminal on the solenoid. Tighten the solenoid battery terminal inside nut to 84 inch lbs. (9.5 Nm). -27 inch lbs. (22-27 Nm).
                                2. Position the starter motor, then install the retaining bolts. Tighten the bolts to 32 ft. lbs. (43 Nm).
                                3. If equipped, install the flywheel inspection cover and tighten the retaining bolts to 89 inch lbs. (10 Nm).
                                4. Install the engine oil cooler assembly, as outlined in Engine & Engine Overhaul of this repair guide.
                                5. Connect the negative battery cable.

                              Nov 01, 2010 | 1991 Oldsmobile Cutlass Supreme

                              1 Answer

                              How to put the Starter in a Eagle Talon 1991.


                              from autozone.com


                              REMOVAL & INSTALLATION
                              See Figures 5, 6, 7, 8, 9 and 10

                              1. Disconnect the negative, then the positive battery cables from the battery.
                              2. For 1990-94 vehicles, remove the battery and battery tray from the engine compartment.
                              3. For 1990-94 vehicles, detach the speedometer cable connector from the transaxle.
                              4. For 1995-98 2.0L turbo engines, remove the air hose.
                              5. For 1995-98 2.4L engines, remove the air cleaner and air intake hose.
                              6. If equipped with 1.8L engine, remove the bracket on the lower side if the intake manifold.
                              7. Detach the starter motor electrical connections.
                              6f8c23b.gif

                              Fig. Fig. 5: Exploded view of the starter motor and related components-1990-94 vehicles, others similar


                              458b681.gif

                              Fig. Fig. 6: Unfasten the BAT terminal connector from the starter motor


                              05a1691.gif

                              Fig. Fig. 7: Unplug the starter motor electrical connector

                              1. Unfasten the starter motor mounting bolts, then remove the starter from the vehicle.
                              d0adab9.gif

                              Fig. Fig. 8: Unfasten the starter mounting bolts
                              d00c214.gif

                              Fig. Fig. 9: Remove all of the starter mounting bolts ...
                              c92a470.gif

                              Fig. Fig. 10: ... then remove the starter motor from the vehicle
                              To install:

                              1. Clean both surfaces of starter motor flange and rear plate. Install the starter motor onto the engine and secure with the retainer bolts. Tighten the retainers to the specifications shown in the accompanying figure.
                              2. Attach the electrical harness connector(s) to the starter.
                              3. If removed, install the intake manifold stay and tighten the retainers to 18 ft. lbs. (25 Nm).
                              4. For 1995-98 2.4L engines, install the air cleaner and air intake hose.
                              5. For 1995-98 2.0L turbo engines, install the air hose.
                              6. For 1990-94 vehicles, attach the speedometer cable to the transaxle. Install the battery tray and battery.
                              7. Connect the positive, then the negative battery cables.
                              Operate the starter to assure proper operation.

                              Oct 29, 2010 | 1991 Eagle Talon

                              1 Answer

                              Wiring for the starter on a 94 ford tempo


                              There is just one wire bolted to the starter with usually a 10mm bolt.

                              May 09, 2010 | 1994 Ford Tempo

                              3 Answers

                              Bad starter on 94 pathfinder how can i start to get to mecs?


                              If you have a standard shift transmission.....give it a push with the key on and release the clutch in 2nd gear to start it.
                              An automatic will have to be towed.

                              Sep 06, 2009 | 2005 Nissan Sentra

                              3 Answers

                              I have a 1999 ford 350 econoline with a dead engine. I don't think it is the battery. How hard is it to change the starter myself?


                              Its pretty simple get a jack and jackstand to support the van locate the starter take out the two or three bolts drop the starter remove the cables and wires make sure you mark your wires so you know how to put them back on bolt the starter back on and your done. Good luck

                              Jul 10, 2009 | Ford E-350 Cars & Trucks

                              3 Answers

                              How do I replace a starter 94 cadillac with a northstar engine


                              The starter on the Northstar engine is nestled in intake valley underneath the intake manifold. You must first disconnect the negative battery terminal and then relieve the fuel pressure. After you will have to remove the intake assembly to get at the starter which then after that its pretty basic to remove the starter.
                              Just be sure to torque the bolts on the intake back to spec when reassembling (torque specs are written on the intake manifold in bold yellow lettering from what I can recall).
                              With these complicated cars you are better off joining a site like caddyinfo.com and reading their how-to forums and asking other Cadillac owners for advice. It`s very easy when you know what you`re confident and have some simple mechanical ``know-how``.

                              Jun 06, 2009 | 1994 Cadillac Seville

                              2 Answers

                              How many bolts on my starter...94 plymouth voyager


                              2 nuts that hold the wires on. and two bolts that hold it on to the housing. Thanks for using fixya.

                              Sincerely

                              JC

                              Jan 08, 2009 | 1994 Plymouth Voyager

                              Not finding what you are looking for?
                              1994 Plymouth Voyager Logo

                              Related Topics:

                              78 people viewed this question

                              Ask a Question

                              Usually answered in minutes!

                              Top Plymouth Experts

                              yadayada
                              yadayada

                              Level 3 Expert

                              64052 Answers

                              Colin Stickland
                              Colin Stickland

                              Level 3 Expert

                              21990 Answers

                              Jeff Turcotte
                              Jeff Turcotte

                              Level 3 Expert

                              6812 Answers

                              Are you a Plymouth Expert? Answer questions, earn points and help others

                              Answer questions

                              Manuals & User Guides

                              Loading...