Re: what is wrong with passenger window 2004 volvo xc70
Sometimes the window clips, or guides, can loosen. if you're not careful and keep operating the window, it could contact the window regulator arms and bend them. this will require window regulator replacement
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the passenger airbag is disabled automatically, the system is called the "smart Airbag system" anytime there is less than 50 pounds in the pass seat (like a child) the air bag is turned off by the control module, there is no manual override switch like the older systems have.
it is located underneath the passenger floor under the dash. Take off the side panel on the side of the center console, then take off the cover shield underneath the pass side dash. Once you remove the two pieces you can see a black cover. Its 3 bolts T25 torx will do the trick. Drop the black cover plate and the pull out you cabin filter. Put back together in reverse order.
You need to remove the front bumper. Five push clips along the hood line, remove the headlight wipers (if equipped), one T25 screw in the front of each fender well, then two 12mm bolts under the headlights (1 each side). Then there are 4 10mm bolts holding the headlight in.
Look for hidden screws, around the edge of the door, inside the door pocket, under the pull close handle and 'in & around' the door handle lever. Then with those successfully removed, the whole door card should slide either up, or in the door edge direction to remove. Be careful not to be too heavy handed, as this will undoubtedly break plastic lugs/clips etc. Then once you have removed the door card, familiarize yourself, with where & how it fits on to the door for reassembly. I hope I've helped. Good luck