Question about 2005 Chevrolet Blazer

1 Answer

Change headlight loe beam passager side outside one

How do I change pas sager side outside headlight

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 45 Answers

Hi: Behind back of rad support and battery are 2 black plastic strips with a bend on the top of them. Pull up on them about 2 inches then take out. Tip headlight top about 1 inch forward and lift out. Replace light and reverse process.

Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Head light have low but when using high does not work just on one side drivers side


HELP! headlight not working even after change - Nissan Forums ...

www.nissanclub.com/...nissan.../302674-help-headlight-not-working-eve...

Apr 1, 2010 - 13 posts - ‎6 authors
My passenger side low beam headlight recently went off on me. ... I've changed the bulb again, and changed the fuse just in case, but .... My driver side headlight wire got loose so when i hit a bump at night if would flicker. ... When you notice one side not working (Low or High beam) it could be the module. Headlight replacement
15 posts
Jan 22, 2009
Low beams don't work but High's do
8 posts
Mar 20, 2005
More results from www.nissanclub.com

Dec 20, 2015 | 2004 Nissan Sentra

1 Answer

How do you replace low beam headlight on a 2006 nissan quest? passager side


if you mean the headlight bulb then iam afraid its a bumper off job ,no quick way on modern cars as no access

Mar 29, 2011 | 2006 Nissan Quest

1 Answer

I'm trying to reconnect my headlights for my 92, and I don't know what wires are for what. I have High beams but no low beams, and relay is new. Two wires are not wired to anything, green and black on...


you have three wires on a headlight bulb the top one is earth and the ones either side are for dip and beam ,cant remember which way round they go though and its dark outside so iam not going outside to look now as just had a shower .

Nov 12, 2010 | GMC Sonoma Cars & Trucks

1 Answer

At night, my drivers side headlight beam is higher & brighter than my passengers side one. i have changed both headlight bulbs (bought from small car parts shops, and not halfords or ford). do i need...


yes you need to adjust it find a wall that you can see both beams and do the adjustment neccesary and your on your way common when roads are not the best or you hit something lightly the headlights change position

Apr 04, 2010 | 2005 Ford Focus

1 Answer

When low beam headlight is on passenger sign is


Try this to eliminate new bulbs for both sides:
With a partner behind the wheel:
PULL out the bulbs one at a time. Keep them plugged in. While you are holding the bulb - have your partner click and HOLD the High Beam Selection. This causes the Low Beam and High Beam filaments to both go on and stay on.
Check both sides this way.
While the bulbs are out, look at the filaments that did not illuminate. Are they broken, bent, or have indications they are burnt out?
You can also change to bulbs (left to right, right to left) and recheck using the above method of holding the high beam selector and checking the filaments.

Jan 04, 2010 | 2001 Dodge Grand Caravan

1 Answer

How to adjust halogen headlights on bmw z4


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Sep 14, 2009 | 2006 BMW Z4 Roadster

1 Answer

Replace a headlight in 2005 chevrolet trailblazer It is the low beam light that is on the passager side.


Purchase a pair of bulbs (30.00). Start by removing the plastic trim with the Chevy emblem, pry off with a screw driver. There are two tabs that hold the head light assembly in place. Pull both up and the assembly falls forward. A quarter turn releases the bulb housing. Change bulb and reassemble in reverse order.

Apr 07, 2009 | 2005 Chevrolet TrailBlazer

1 Answer

How to change bulb on drivers side low beam head light


My niece has a jimmy, they should be the same. The inside should be the high beam, the outside the low, DO NOT TOUCH THE GLASS ON NEW BULBS! Oil will cook on them and pop them! Both come off the same way. Take off the big rubber thing. They are soft but over hard plastic. Just pull them off. If you have trouble, you can flip the little wire clips that hold the headlight housing in place, this will give you room to see the rubber caps enough to figure them out better. The bulb assembly rotates CCW counter clockwise, and should slip out easily. Take the wires and plug off. it should be obvious how it pulls off. Snap the new bulb into the wires without touching the glass part. Gently replace in backwards order as you removed it. Put the rubber caps on, they keep water off the bulbs. It will break them!

The passenger side was harder for me. I had to take the air cleaner off, the whole cover and filter.You should be able to see or feel the same type caps, The low beam outside, High beam inside. The same 2 wire clips are there to release the housing. Everything pretty much goes the same, other than the air cleaner has to be removed and replaced. And make sure the rubber cap is replaced! Good Luck and good motoring!

Dec 15, 2008 | 2005 Chevrolet Trailblazer Ext

3 Answers

Low beam headlight is out.


you shouldnt have to take the housing off their sould be a lttle hole to install a new head light its on the back of the housing their you will see the back of the light bulb and all you do is unclip the old light and plug in and clip the new one its that simple

Oct 19, 2008 | 2004 Chevrolet TrailBlazer

Not finding what you are looking for?
2005 Chevrolet Blazer Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...