Question about 2000 Ford Escort

1 Answer

Camshaft positioning sensor

Where is the camshaft positioning sensor on a 2000 ford escort zx2?

Posted by on

  • jesse777 May 11, 2010

    Hi,



    Your car has two camshaft sensors. Has a camshaft related trouble code been found? If yes, which one?



    Heads up-- camshaft sensor codes can set on this vehicle NOT indicating a problem with the sensor or its related wiring.



    Please desribe any problems you are having to the best of your ability.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 21,949 Answers

Back top left side of rocker cover

Posted on Jan 17, 2009

2 Suggested Answers

SOURCE: How do I replace a camshaft position sensor on a 2000 ford escort

bullshits, the CMP sensor is near the 4 injector, you have to take out all the electric conector near injector 4, take out the 2 screws that hold the fuel rail, sometimes you have to take out the 4 injector for the space, then take out the screws that hold the CMP, lub the o´ring of the new one and reverse this steps.

Posted on Oct 01, 2008

  • 16 Answers

SOURCE: 2002 ford escort zx2 camshaft sensor fit a 99 zx2?

Yes, All the years of the ZX2 utilize the same engine. 1998-2003 are all the same except for ECU programing and the MAF wiring. You should not have a problem.

Posted on Jul 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Crankshaft Position Sensor ford escort zx2


make sure its the problem-if a code reader was used-thats usually a general idea--a data stream must be run to confirm--independent shops do that---- a haynes manual at a partstore or library has service books that techs use

Jun 04, 2014 | 1999 Ford Escort

1 Answer

I have a 2000 ford escort zx2 that has a code of po340, i wanted to know what needs to fixed and a good repair shop in my area.


It needs a timing belt. It has either stretched or jumped time. You can try replacing the cam sensor first, but despite the description, it usually means it is out of time. You'll want to make sure the cam sensor is plugged in (on the front right of the engine head) and that the VCT solenoid is plugged in (sticks out of the top left of the valve cover) and have it scanned again to see if you got any new codes like P138x.

P0340- Camshaft Position Sensor Circuit Malfunction

Dec 06, 2010 | 2002 Ford ZX2

2 Answers

Location of cam and crank position sensors


The cam sensor is located at the front right front side of the cylinter head, while you are facing the engine.---------- The crank position sensor located below the pcv valve that is located on block not the valve cover, its below the exhaust manifold. You will have to remove the catalytic converter to see the exact view of both the sensors. The camshaft sensor is on the head. The crankshaft sensor is in the block, just below the exhaust manifold. ------------ Thanks.Helpmech.

Nov 12, 2010 | 2001 Ford Escort ZX2

1 Answer

How many cam position sensors does a 2000 ford zx2 has?


It has 1 cam position sensor and 1 crankshaft position sensor

Jan 07, 2010 | 2001 Ford Escort ZX2

1 Answer

What is a shift cam sensor?


I think you may be looking for a camshaft position sensor. The part number is CSS627 and the cost is around $16.00, this is Advance Auto Parts number and price. Thanks and good luck with your repair.

Jul 10, 2009 | 2001 Ford Escort ZX2

1 Answer

2000 Ford Escort ZX2 hot, idles ruff and sounds like a vacuum leak


Check your IAC,, Idle Air Control solenoid. It is attached to the throttle body and controls the air flow at idle by bleeding air into the throttle body.

May 22, 2009 | 2000 Ford Escort

1 Answer

2002 ford escort zx2 camshaft sensor fit a 99 zx2?


Yes, All the years of the ZX2 utilize the same engine. 1998-2003 are all the same except for ECU programing and the MAF wiring. You should not have a problem.

Apr 07, 2009 | 2002 Ford ZX2

1 Answer

Check engine light will not turn off '99 Ford zx2


Looks like you have tried everything to turn off the check engine light. However, did you find out the error code for this? Until you resolve the issue, the light will keep coming back. You need to get diagnostics done

You can save some money by checking a new website http://prundo.com/ for free coupons for check engine light!

Mar 11, 2009 | 2000 Ford Escort

2 Answers

2000 ford escort zx2 will turn over but it won't start!! HELP!!


have you checked the fuel deliverey maybe the fuel filter is blocked

Jan 28, 2009 | 1999 Ford Escort

2 Answers

How do I replace a camshaft position sensor on a 2000 ford escort?


2.0 cam position senser is on top front of engine near coil pack probably not problem though most of time its a timing issue idler pulley or tensioner and belt.

Jun 04, 2008 | 2000 Ford Escort

Not finding what you are looking for?
2000 Ford Escort Logo

Related Topics:

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...