Question about 2000 Ford Taurus

1 Answer

Ford taurus will not shift from low gear

I have a 2005 ford taurus and had no problem with transmission, then one day was going to work and it would no longer shift from low to higher gear, not even if I did it manually. what could be wrong

Posted by on

  • Frank Simard
    Frank Simard May 11, 2010

    What is the millage of the vehicle?

  • Anonymous Mar 19, 2014

    wont go when shift all gears

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 2001 ford taurus and i have transmission fluid leaking on ground when it runs. i was driving it today and it would not shift gears. Then when i got home i saw transmission fuild in the ground.

Posted on Mar 08, 2009

  • darnelllavel Mar 08, 2009

    I have a 2001 ford taurus and i had a gear symbol with a explanation point in the middle. When i was driving it would not shift gears and when i arrived home i looked under the car and it was leaking transmission fluid. I check the dip stick and it was completely dry. The gear symbol i was telling you about i found online and it said that it had something to do with the cruise control. I read online that it could be the cause for it not shifting. I plugged it in and the symbol went away and it shifts just fine. It used to shift hard in reverse and drive. But i am concerned about the transmission fluid.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why won't a 2005 Taurus with a fax transmission shift into 3rd gear?


run the fault codes and check for a servo/solenoid fault or a faulty TCM module.

Jul 16, 2014 | 2005 Ford Taurus 3.0

1 Answer

Automatic transmission on my ford Taurus won't shift, although the gear shift, does shift out of park, it just isn't working to drive it


need a transmission likely...check linkage at trans, and does it work in reverse? low? anything?

Feb 26, 2014 | 2002 Ford Taurus

1 Answer

I have a 2005 Ford Taurus, it'll shift out of park


cound be transmission fluid too low or transmission filter could be clogged.

Jul 08, 2013 | Cars & Trucks

1 Answer

I have a 1996 ford taurus. when i stop it does not go back into gear until i press on the gas. when it runs it runs fine


Check the transmission fluid level.

Do this by turning on vehicle, shift through all gears 2x, then leave in neutral.

Pull the transmission dipstick out, clean it off, insert transmission dipstick and pull out again.

The fluid should be in the crosshatched area.

If it is low you will need to add ATF fluid in the dipstick hole.

Dec 13, 2010 | 1996 Ford Taurus

1 Answer

1998 Ford Taurus Station Wagon SE


CODE P500 VSS NO SIGNAL.PROBLEM COULD BE CONNECTOR TO VSS IS SHORTED OR THE MAGNET GEAR ON TRANSMISSION DRIVE SHAFT COULD BE BROKEN OR MISSING TEETH.

Aug 04, 2009 | 1999 Ford Taurus

2 Answers

The shifter on the column moves but the car wont go into gear


the linkage is broke or came off the transmission

Jul 25, 2009 | 2004 Ford Taurus

3 Answers

2001 ford taurus TRANSMISSION PROBLEM


most likely due to a stripped out torque converter or a broken pump shaft. trans. has to come out to repair either or. you should make sure the fluid is full first. with the car running and warm, check fluid- if it seems over full, the pump shaft is broken, if it's just full- probably the torque conv., if its low add trans. fluid (mercon 5) 1 qt. at a time until in crosshatched area on the dipstick. hope this helps and good luck

Feb 03, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
2000 Ford Taurus Logo

1,234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

69244 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Ron Lankford

Level 3 Expert

5383 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...