Question about 1992 Dodge Dakota

2 Answers

Serpentine belt on 1992 dakota

I am trying to replace the serpentine belt on my 1992 dodge dakota and I need the diagram for it.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 40 Answers

You don't mention which engine you have in your '92 Dakota, but it's likely the 3.3L and if so, here's the diagram. Even if your engine is not the 3.3L the principals for replacing the belt are the same.

Get a serpentine belt tension release tool (local parts store) and use it to take the tension wheel away from the belt, which will make it loose enough to remove by simply pulling it off one of the pulleys (the alternator will be easiest) and then wiggle it out of the engine bay. The tool should come with a selection of heads for the different variations of tensioner arms/bolts. Once the belt is removed, replacing it is the reverse process.

Hope this helps, and please rate my answer.

serpentine belt on 1992 dakota - 2e5cb67.gif

Posted on Jan 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need the routing instructions for the serpentine belt for a 1992 dodge dakota 8 cylinder with air and power steering

Posted on Apr 14, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need diagram for serpentine belt


Here's a link to your vehicle. 1996 Dodge Dakota Serpentine Belt Routing and Timing Belt Diagrams Your vehicle has 3 different engine sizes.

Jul 29, 2015 | 1996 Dodge Dakota

Tip

Dodge Serpentine Belt Diagrams


Dodge Dakota 3.9L 1992 thru 1993 Serpentine belt diagram with A/C;



ledsled378_1.jpg

on Apr 02, 2010 | Dodge Ram 3500 Cars & Trucks

1 Answer

I need a serpentine belt diagram for a 1993 dodge dakota...3.9 V6...without A/C


10_1_2011_11_40_55_pm.jpg

Fig. Accessory serpentine belt routing-3.9L, 5.2L and 5.9L LDC gasoline engines IMAGE LINK

Hope helps (remember to rating this free amswer)/

Aug 18, 2011 | 1993 Dodge Dakota

1 Answer

I need the routing instructions for the serpentine belt for a 1992 dodge dakota 6 cylinder


some time the diagram is under the hood or on the radiator support or fenderwheel

Dec 11, 2010 | 1992 Dodge Dakota

3 Answers

I need a diagram for a 1997 dodge dakota 2.5 L eng. serpentine belt


In the search bar, type---( belt routing diagrams,)
Click on the site that says----- serpentine belt routing diagrams and timing belt.
It will take you to---- www.2carpros.com/car_repair_information/index.htm
Scroll down and click on the year, make , model
Then scroll down to the different diagrams for that truck.

May 08, 2010 | 1997 Dodge Dakota

1 Answer

Replace serpentine belt on 1992 dodge grand


Click on the following free direct Link.
It has the correct Belt Diagrams for your 1992 Dodge Grand Caravan wirh either the 3.0L SOHC V6 or the 3.3L V6.

http://www.2carpros.com/car_repair_information/year/1992/make/dodge/model/grand_caravan/1992_dodge_grand_caravan_drive_belt_routing_diagram.htm


Included on the Diagrams are the Instructions on "Rotating" the Automatic Tensioner. See Below for additional Instructions to make your job easier.

"HOW TO": I professionally prefer the Serpentine Tensioner Tool.
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s).
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (located on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening located on the Tensioner Arm) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Before You GO:
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Apr 11, 2010 | 1992 Dodge Grand Caravan

1 Answer

How to put on a serpentine belt.. fo a 89 dodge


Find the belt routing diagram (under hood or on radiator support). put a wrench on the center bolt at the idler pully push or pull to loosen belt.

Sep 08, 2009 | 1989 Dodge Dakota 2WD

1 Answer

Serpentine belt placement diagram


There a so many different combinations because of engines and options .. but here they all are

Mar 23, 2009 | 2000 Dodge Dakota Quad Cab

2 Answers

Serpentine belt digram


Don't just try looking for the 3.7. The 4.7 has the same routing also. I can't get a diagram from my chrysler site but most quick lanes have the books on that and they should be able to talk you thru it.

Jul 06, 2008 | 2005 Dodge Dakota

Not finding what you are looking for?
1992 Dodge Dakota Logo

540 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...