Question about 2003 GMC Yukon Denali

2 Answers

When i make sharp turns my wheels make a rubbing noise

It seems as if its getting louder especially when i turn into drive thrus like the bank or a food place.Also on u turns.

Posted by on

  • nalonative Jan 08, 2009

    mahalo for such a quick respones..

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Coud be a bad shock, or weak springs also, your wheels may have the wrong back spacing on them as well, turn your tires and see where the contact is occuring,

Posted on Jan 08, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The tires may be to large for the vehicle. or the suspension may be worn out

Posted on Jan 08, 2009

  • tj52991 Jan 08, 2009

    your welcome.. if that doesn't work check your power steering fluid and swaybars

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Dodge Stratus rubbing noise when turning. Sounds like rubber against metal. No popping noise.


It could be several things ....
Wheel bearings - jack the front driver side up. First ... just rotate the wheel ... you should hear NOTHING. Any noise menas there is probably a wheel bearing/hub issue. Now take hold of the tire in the 9am and 3pm positions. Try to push/pull from side to side ... if there is any "play" in the wheel the bearings are going.
Brake line interference - a lot of brake lines have a plastic sheath in the wheel well area ... check to see that the line/plastic sheath shows no wear when you have the wheel off...that might cause the issue.
Steering linkage - even though the upper control arms were recently replaced look at all the ball joints and grab hold of them and see if there is any play/movement.
Repeat on the passenger side..
Good luck on your troubleshooting

Jan 24, 2018 | Dodge Cars & Trucks

1 Answer

I have a noise when I'm driving. It sounds like when the brake pads wear n start on the rotors. When I turn my wheel left, it's louder, then softer when straight again. Sounds like smooth grinding?


Congats to you, especially at 53. Go back to the passenger side and check the backing plate/dust cover for the rotor. They do bend or can be bent when doing the work you did. They can and will make noise and get louder when turning. I usually use a screwdriver and go around and bend it away from the rotor. Sometimes I have to pull the tire off, because it is rusted and rubbing towards to center of the rotor.

Jun 10, 2016 | Cars & Trucks

1 Answer

1992 GMC sierra two wheel drive 4.3l V6 Have a vibration or rubbing noise when I turn the steering wheel sharply to the left at parking lot speeds.


If you let go of steering wheel and step on brakes does the wheel vibrate?

I'd say its either warped rotors, power steering malfunction, or possible wheel bearing, although if wheel bearing you should feel/hear a hum which would get louder depending on which way you turn the vehicle.

Aug 23, 2013 | 1992 GMC Sierra

1 Answer

I hear a loud grinding noise when i drive my car


Check front tyres & wheel bearings espesially the R/H/F. Feel tyre for high / low spots on inside & jack up & spin wheel if you get noise while jacked up it is not the tyres but wheel bearing or brake pads but more than likly a crook bearing by the sound of it. It needs to be tended to ASAP

Jun 28, 2012 | 2004 Volkswagen Passat

1 Answer

Squeaking/Moaning noise coming from passenger front wheel


Wow that sounds like a wheel bearing about ready to be replaced. Have a service tech check your bearings.

May 17, 2010 | 1995 Lincoln Continental

3 Answers

The car makes a howling noise while driving it


well did the noise start after the tires were rotated?could be choppy tires,,,if not ,i strongly think it sounds like a bad wheel bearing,,,,if you drive and while its making the noise turn left and right quick and see if the noise gets louder and which way turning makes it louder,,if you turn leftand it gets louder its usually the right wheels bearing as you are putting load on it, if it makes the noise louder while turning right its the left wheel bearing,,,got it

Oct 08, 2009 | 2000 Pontiac Grand Prix

1 Answer

Noise coming from front of car


It sounds exactly like a wheel bearing problem.The right side its seems would be the problem. When you turn right it puts more pressure on the bad bearing making it louder. I would suggest replacing both. If on is gone the other one isn't far off. Hope this helps

Mar 05, 2009 | 2008 Hyundai Elantra

1 Answer

Creaking sound while turning steering wheel


You might have the lower swing arm bushing checked mine slid of the bushing but stayed in the cradle on the passengers side.Only made noise when ibacked or turned sharp left.

Nov 26, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2003 GMC Yukon Denali Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...