Question about 1997 Buick Park Avenue

1 Answer

1997 Buick Park Avenue

Need information on how to take off a serpintine belt on a 1997 Park Avenue

Posted by on

  • 1 more comment 
  • Anonymous Mar 15, 2014

    got a p0705 code on my1997 buick park avenue

  • Anonymous Mar 16, 2014

    wire cross up onr buick park avenue 1983 need to straight

  • Anonymous Mar 22, 2014

    need to get to the antenna plug

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 416 Answers

This is the diagram but you should have factory belt diagram sticker is still somewhere under the hood
If not:
http://www.mvreader.com/multiview/dayco/zoom.php?zoom_item=C0001D&l=n&catalog=auto&category=
To replace the serpentine belt on a V6 3800 you must jack up the motor and remove a motor mount. You must then use a breaker bar with a socket (13/64") and pull it toward the front of the car to release the belt tensioner. Put the new belt on, tighten it, put the mount back on, and lower the jack.
Driving without a belt can cause the motor to overheat, will cut power steering, and will not recharge the battery, so you should probably get a tow
Good Luck

Posted on Jan 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the clock need to be reset after changing the car's battery in a 1997 Buick Park Avenue, and if so how do you set it?


If it is the factory radio you need to set the clock on then here is the information:
Setting the Clock Press and hold HRS until the correct hour appears. Press and hold MIN until the correct minute appears. You may set the clock with the ignition off if you press RECALL first and follow the same procedure described above

This was taken from the owners manual, which I was able to locate online here:
http://www.vadengmpp.com/owners-manual/buick/1997-Buick-ParkAvenue.pdf

Jan 27, 2017 | 1997 Buick Park Avenue

3 Answers

I can't find a diagram of the belt installation for my 97 Buick Park Avenue. Can you help?


I can help, a belt diagram for a 1997 park ave, some of these cars come with a super charger, heres a diagram that list both the regular belt and then the charger belt, use what is needed, hope this helps.cfccfd3.gif

Sep 09, 2010 | Buick Park Avenue Cars & Trucks

1 Answer

FUSE IDENTIFICATION FOR 97 BUICK PARK AVENUE


Several Fuse Panel locations there; all fuse's description can find it in 1997 Buick Park Avenue Owners Manual (page 331 and next).

Hope this help (remember comment and rated this post) TY for using Fixya.

Apr 19, 2010 | 1997 Buick Park Avenue

1 Answer

Fans don't work after relacing serpintine belt.


look around the wiring and sensors when belt broke some debris may have damaged or disconnected the circuit

Feb 14, 2010 | 1993 Buick Park Avenue

1 Answer

How to take off serpintine belt off a buick park avenue 1997


iys been while since i messed w/buicks but if the engine is side mounted you must remove motor mount to to put a new one in

Dec 20, 2009 | 1997 Buick Park Avenue

1 Answer

Is there a free online diagram for changing the serpentine belt in a 1997 buick park avenue


You might try Autozone website I believe they have diagrams like your asking about. Good luck.

Nov 03, 2009 | 1997 Buick Park Avenue

1 Answer

1997 buick park avenue


Is there still Tension on the Belt? If so, You will need to find Something that will Push the Pulley in the Lower Position so that you can remove the Belt. Not going to be Easy and you will need a Helper for this Job. Please Rate My Response! Thanks!

Jan 31, 2009 | 1997 Buick Park Avenue

4 Answers

Motor mounts and pulley tensioner


that car to my knowlege & replacemt has one engine mount by the belt & 2 tranny mounts one in the front & that canbe purchased at amazon for about $130 alot cheaper then dealer! also rear tranny can be purchase as insert or complete with bracket & mount together! have no clue on tensioner as mine has not went yet!!

Jan 22, 2009 | 1997 Buick Park Avenue

Not finding what you are looking for?
1997 Buick Park Avenue Logo

1,435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...