Question about 2004 Hyundai Santa Fe

2 Answers

Low Beam Headlights don't work anymore

The parking lights come on underneath the bumper. When you flip the lever forward the High Beams come on, but the low beams won't work. It's getting power, but could there be a switch out or something thats causing the low beams not to work?

Posted by on

  • 1 more comment 
  • stevem_1977 Jan 08, 2009

    i did. no fuses are blown. the high beams work so I know the lights are getting power just not when the low beams are on.



  • Anonymous Jan 11, 2009

    i have the same identical problem with my santa fe and i am going crazy.

  • mtbcc5 Mar 14, 2009

    Low beams won't come on, high beams work. No fuses blown.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did u check fuses ?

Posted on Jan 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just went through the same thing. Replaced the bulbs with expensive ones about 3 months ago, both low's went out together. I looked at all fuses relays etc to no avail. Called dealership to ask about a relay or something and was told they go out together for some reason. Sure enough I replaced them yet again and they were fine. WTF??????

Posted on May 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 Chevy impala V6 sometime the automatic headlights comes on and sometimes they don't only the parking lights and when I pull out for my headlights to to come on turn off of automatic mood the...


ok when push the lever forward the high beams don't stay on ? then that lever should be replaced cause that's ur dimmer switch to switch between high/low beam lights if the lever is bad can surge you headlight and blow the headlights, have you check headlight bulbs its rare but it has happened that both blow at the same time

Mar 09, 2015 | 2002 Chevrolet Impala

1 Answer

Why are my headlights cutting out when i turn my high beams on?


The problem will be due to a malfunctioning headlight dimmer switch and a dimmer switch connector. Also check the high beam connector.

Jul 14, 2013 | Ford Futura Cars & Trucks

1 Answer

2005 Dodge Magnum low beams do not work


Obviously you have a connector which has come partially apart somewhere between the Headlights and the Headlight Switch. Most modern vehicles have several connectors between the Headlight Switch and the Headlights, Start at the Firewall Connector and work forward toward the Headlights making sure all connectors are securely mated. Another remote possibility is that you have fractured the "Low Beam Filaments" in BOTH Headlights. You don't mention how hard you hit the Speed Bump but if it caused the car to "Bottom Out" the front suspension it was a hard enough impact to fracture the filaments. You can use a 12 Volt Test Light at the Sockets for the Headlight Bulbs and see if you are getting 12 Volt power there. If you are in Low Beam position you have fractured the filaments. Check with High Beam too.

Nov 18, 2011 | 2005 Dodge Magnum

1 Answer

Click headlights to low beam and no lights work on high beam


I'm not sure exactly what your problem is. When you "click" your lights to low beam, your high beams should not work. But if your low beams work when you "click" them on, but your high beams don't work when you "click" them on, you either have a blown fuse, bad relay or high beam elements burned out on both lamps. (Not so unusual) Possibly a bad "dimmer" stalk switch or bad wiring, too, but a little less likely.

Sep 05, 2011 | GMC K1500 Cars & Trucks

1 Answer

1992 Chevy Lumina. High beams work, low beam headlights do not.Bulbs are fine.


Bad dimmer switch (lever to flip between beams) common GM problem.

Apr 04, 2011 | 1990 Chevrolet Lumina

1 Answer

Passenger headlights only do not operate.


check the bulbs first and also the fuses theres a fuse for each side and for low and high beams, start there, good luck.

Feb 19, 2010 | 2002 Mitsubishi Eclipse Spyder

1 Answer

2001 Ford Focus - High beam / low beam problem with headlights


just replace the dimmer switch under the column its wore out on the low beam side

Jan 17, 2010 | 2005 Ford Focus

1 Answer

My 87 k5 blazer headlights don't turn on when the car is started and running any more... all 4 headlights turn on fine when I pull the lever all the way out for high beams


The vehicle should not have to be running for head lights to burn.If high beams work,then the low beam head lights could be burned out,even though they light up with high beams.The dimmer switch,can be the problem if the head lights only work on high beam.

Dec 12, 2009 | 1987 Chevrolet Blazer

1 Answer

Ford focus 2002 zetec Headlights


Push the lever forward to turn on high beams, if they do not work when you do this. You need a new high/low beam switch.

Mar 30, 2009 | 2004 Ford Escape

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

890 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...