Question about 2007 Toyota Tundra

1 Answer

Chatter when turning

How do you tighten the serpentine belt on a 2003 tundra?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 333 Answers

The serpentine belt should not have to be tightened because ther is a tensioner to keep it taught. If it feels loose then you need to check the tensioner and also see if the belt stretched. I hope this helps.

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt and instructions for 2008 Toyota Tundra 4.7 litre how to


Hey

I read your question and I think Reliable-Store can help you in this. Here's the site link. TOYOTA TUNDRA SERVICE REPAIR MANUAL 2007 2008 2009 2010 DOWNLOAD

May 27, 2016 | 2008 Toyota Tundra

1 Answer

Change a serpentine belt on 2003 Pontiac vibe


should see like long bolt I believe on the alternator or near you it turn left to let off tension rt to tighten belt

Mar 07, 2015 | 2003 Pontiac Vibe

1 Answer

How do i replace the alternator on a 2000 tundra 4.7L 4x2 non serpentine configuration


I presume the serpentine belt is in the way. First, disconnect the battery terminal. Then make sure the serpentine belt diagram is readable and remove the serpentine belt. Then release the tension on the alternator belt and remove all the bolts and wiring.

Nov 20, 2014 | 2000 Toyota Tundra

1 Answer

What is the easiest and fastest way to replace the tundra serpentine belt?


loosen tensioner, take belt off, install new belt except last pulley, loosen tensioner, install belt on pulley, let tensioner tighten belt. If it takes 5 minutes, your doing something wrong.

Aug 25, 2010 | Toyota Tundra Cars & Trucks

1 Answer

How do i change the timing belt in a 2003 mitsubishi lancer es


Hi, first pop the hood and find the serpentine and alternator belts on the left side of the engine compartment. The serpentine belt runs around four pulleys. The alternator belt uses two pulleys. They share space on the drive shaft so they are right next to each other.
Of the four pulleys using the serpentine belt, three of them are vertically in line (closer to the front of the car) and the fourth stands alone (closer to the cab). Of the three vertically in line, the middle pulley is the one used to adjust the tension on the belt.
You must first break loose the bolt in the center of the tension pulley (the bolt is facing the passenger tire) by turning it counter clockwise. Then leave that bolt and go to the bolt connected frame connected to the other side of the tension pulley (this bolt is facing the front of the car). Turn that bolt counter clockwise until the serpentine belt is loose enough to pull off. Replace the belt and tighten in the opposite order. Once the desired tension is reached, crank the car and run it for a few minutes. Finally cut the car off and check the tension, tighten or loosen as necessary.
Take care

Aug 02, 2010 | 2003 Mitsubishi Lancer

1 Answer

What is the procedure for replacing/tightening the serpentine belt on A 2003 4cyl Vue AWD? Is the 90 degree twist test indicate appropriate tightness?


the serpentine belt should have its own tension-er that's already there and how you get it off with a 1/2 or 3/4 ratchet

Oct 12, 2009 | 2003 Saturn VUE

1 Answer

How to change serpentine belt, 2004 Toyota Tundra


locate tensioner pulley; release tension from belt; remove belt; make sure not to forget how the belt is routed; route belt around all pulleys but tensioner; put tension on tensioner pulley; route belt over tensioner pulley

Oct 03, 2009 | 2004 Toyota Tundra

1 Answer

I dont have a diagram to run serpentine belt to a toyota camry 03


Hi

Replacing Serpentine belt on a Toyota camry 2003—


Step 1--Examine the belt placement of your Toyota Camry fan belt so that you will remember how to put it back once you have removed it. Refer to the vehicle owner's manual for further information. Locate the pivot bolt on the front passenger side of the engine. Loosen the pivot bolt with a socket wrench.


Step 2--Loosen the adjustment locking bolt that is just below the tensioner pulley with a socket wrench, and then loosen the tensioner pulley to allow the belt to move free.


Step 3--Check the belt for any signs of cracking or irregular wear, so you can fix any problems that may exist with the pulleys. Remove the fan belt from the pulleys on the engine and take it out of the engine compartment.


Step 4--Wrap the new fan belt around each of the pulleys the same way it came out. When you have the belt in place, tighten the tensioner pulley with a socket wrench.


Step 5--Tighten the adjustment locking bolt and the pivot bolt with a socket wrench, and then look over the engine to check that everything is back in place.


Step 6--Turn the vehicle engine on and watch it for a few minutes to verify that everything is operating properly, then turn the engine off.


Please refer to these links for serpentine belt diagrams—

Serpentine belt on a Toyota camry Link 1

Serpentine belt on a Toyota camry Link 2

Please do accept the solution and revert for further assistance.

Thanks
Rylee

Jul 13, 2009 | 2003 Toyota Camry

2 Answers

2003 Tundra timing belt


Perform a general tune-up - checking plugs, plug wires, belts, coolant, filters and timing. Check the alignment and wheel bearings. Check the engine compression. Check the hoses for corrosion.You just want to kind of look everything over real good and see if there is anything worn like belts and hoses. Other than that just keep maintenance up.

Dec 08, 2008 | 2003 Toyota Tundra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...