Question about 2003 Toyota Celica

1 Answer

2003 Celica GTS fuel door problem!!!

My celica fuel doors got rusted from inside and it fell off. How do I install new one? I already bought a new fuel door.

Posted by on

  • 1 more comment 
  • raizer012345 Apr 24, 2009

    I have the same problem, i got a carbon fiber fuel door and it has two metal rivets that I cant for the life of me get out (Dont say drill it out cuz I tried this and it doesnt work). How can i get this metal rivet out?!

  • MoJoRizen May 24, 2009

    My fuel door also broke and fell off. The bracket that connects it to the car is broken, and a piece of it is still riveted to the car.

    Did anyone ever figure out how to install a new one?

  • robert kious May 11, 2010

    when it rusted off, is there still the little arm that you can swing/pull out ? if there is take your new cover and go to ace hardware and get the (prolly) to short bolts that thread into the new cover/or the arm that is still on your car i hope. usually just a ten mm or 8 mm bolt.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem and I drilled out the rivets...it does work after giving it a little time. You will be able to drill all the way through the rivet and then pull it out. You'll have to order a new hinge or door and reinstall the rivets. Can go to Harbor Freight Tools and get a rivet tool with rivets if you don't have one. They're not expensive.

Posted on Jun 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door ajar light stays on intermittently... 2000 celica gts.


Bad door switch bad adjustment or loose wire.
Try to determine which door and go from there.

Oct 26, 2014 | 2000 Toyota Celica

1 Answer

2000 celica gts door ajar light flashes or stays on intermittently.


check the switch in the drivers door as this normally 99% of the time the problem

Oct 26, 2014 | 2000 Toyota Celica

2 Answers

Toyota Celica 2000 GTS hatch won't unlock


Go inside the rear hatch area remove the trim panel and manually trip the hatch release.

Jul 26, 2012 | 2000 Toyota Celica

2 Answers

My fuel door broke off, can I fix it using the old fuel door without buying new one. It is a 2003 Celica


no not really but you could look for one in a slavage yard. find one that lets you pull off your parts as they are cheap. usually just two bolts to remove. some are riveted on but not many. good luck

May 18, 2010 | 2003 Toyota Celica

2 Answers

1990 Toyota Celica will not start.


Sounds like the connection from the battery to the chassis ground is bad. Try replacing the Negative battery wire and make sure where it attaches to the frame is as rust free as possible

Dec 30, 2009 | 1990 Toyota Celica

2 Answers

Power lock on driver side door does not work on2003 Toyota Celica


remove the door panel and change the solenoid on the inside of the door

Apr 16, 2009 | 2003 Toyota Celica

1 Answer

Celica fuel doors problem !!!


first you will have to take a small punch and knock out the center and then drill the rivet out.and then you will have to put new rivents to hold the door back on. You will have to have a rivet gun and 2 rivits to fit the hole

Jan 08, 2009 | 2003 Toyota Celica

1 Answer

2002 Toyota Celica GTS


Thanks you for asking for my assistance.
Let me clarify, the entire handle assembly is moving on the outside of the door when you open it; it is real loose? If so, there are two 10 millimeter bolts that hold the handle in place. Yes, you do have to pull off the door panel to access the handle bolts. I can give you the panel removal proceedure if you need it.

Oct 14, 2008 | 2002 Toyota Celica

2 Answers

1985 Celica GTS convertible 2.4L


sounds like a clogged fuel filter to me.

Aug 12, 2008 | 1985 Toyota Celica

1 Answer

Fuel filter


at the begining is very complicate because it is necessary to remove a lot of pieces. I had the same problem and solved it cutting the fuel line and I had to install a new filter with clamps. It will allow you to remove it again without problem.

Jul 24, 2008 | 1990 Toyota Celica

Not finding what you are looking for?
2003 Toyota Celica Logo

Related Topics:

1,921 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...