Question about 1992 Subaru Justy

2 Answers

Hey i got a 1991 subaru justy that i purchased for 50 bucks. cars in great shape. anyways a guy that owned it previously stuck a anti theft device (haha) on it and when its on it will drain the battery even if the car isnt on/

Posted by on

  • snakebite420 Jan 11, 2009

    aready had that, that is what the anti theft device is, but when the toggle switch is on it will kill the battery in 3 days

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Take it to an alternator/battery shop, they will usually do a free check. It may also be a bad cell in the battery, causing it to slowly discharge.

Posted on Mar 06, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 42 Answers

The easiest solution is to purchase a battery shut off switch. You can buy them at fleet farm, or an auto parts store. It basically just interupts the flow of electricity from the batter. The bad thing is that you have to hit the switch before you start your car, and after your done driving. But its cheap and alot easier than tracking down faulty electrical components.

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 subaru justy fuse box where is it located? video of how to replace bad fuse - video


FIRST I checked my favorite site for your drawings...
BBB Industries... (pretty bad (unusual))...

Here is where I recommend (if you are goig to work on this a lot... get the FACTORY+WORKSHOP repair manuals...!!!

The internet "wisdom"... is about as good as a
politician's word (80 to 90% pure beef extract).

Posted ASK
"1989 subaru justy fuse box heater video"

Ask com What Your Question

or BING

https://www.bing.com/videos/search?q=1989+subaru+justy+fuse+box+heater+video&FORM=HDRSC3
1989 SUBARU JUSTY 1 2L L3 Blower Motor Control Module Resistor RockAuto

Jan 14, 2016 | 1989 Subaru Justy

1 Answer

I own a 1991 Subaru justy gl , when driving in any gear , the rear transaxle/wheels will start making a thudding and squeaking sound. Any ideas at what a troubleshoot would be ?


Could be any number of things. Usually, dealers will diagnose for $100. It may be a serious problem that may contribute to a situation you or your insurance company would not want you to be in.

Mar 18, 2015 | 1991 Subaru Justy

1 Answer

Where can I get program to change the settings in A subaru justy ECU


Hi the only way to change settings in a factory ecu is to have the right software program to reflash the ecu to the new settings, if you dont have that it will have to be taken to an automotive shop, however you can adjust settings in an aftermarket ecu with the software they usually supply with the ecu

Apr 19, 2012 | 1991 Subaru Justy

1 Answer

Will a 1991 subaru justy fuel line fit on a 1991 subaru legacy


As long as its of the same construction, length, inside diameter, looks the same, and isn't cracked it should work. I hope this helps.

Jul 31, 2011 | 1991 Subaru Legacy

1 Answer

1991 justy will go into gear but will not pull out


Please more info!! Manual?? Give us help to help you!

Mar 26, 2010 | 1991 Subaru Justy

1 Answer

91 justy does not go into any gear,cvt cable fine,engine runs good,moving lever on trans does nothing


The CVT Buffer brushes may be worn out or the transmission band may be broken -- need to have checked by certified transmission tech

Jan 08, 2010 | 1991 Subaru Justy

1 Answer

Hey i'm doing some school work and i have a question about the clutch fork free play on a 92 Subaru Justy. What is the Proper Free play? a) .12-.16 inch b) .25-.50 inch c) .08-.16 inch d) .75-.85...


c) .08-.16 inch The measurement point is close to where the adjustment is attach a dial indicaator (with magnetic base) to a place where you can line up the dial indicator to contact the clutch release lever, then with your hand move the lever all the way in one direction and hold while you turn the zeroing ring dial to line up with zero to the needle then move the clutch lever in the opposite direction , note the reading and adjust accordingly to bring it into spec.

Jul 29, 2009 | 1992 Subaru Justy

1 Answer

High fuel consumption


try adjusting the distributor

Jun 08, 2009 | 1987 Subaru Justy

1 Answer

Trouble code 13, 1990 Subaru Justy


cmp sensor(camshaft position sensor)check the wiring harness first.to see if its loose if not then it needs replaced thats what trouble code 13 list.

Nov 13, 2008 | 1990 Subaru Justy

Not finding what you are looking for?
1992 Subaru Justy Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...