Question about 2002 Chrysler 300M

1 Answer

Tail lights wont work

I've checked all the fuses and they are all good, but my taillights wont work but all the rest of my light do

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 42 Answers

The light bulbs went bad. Or the wiring to the lights it bad. Take out the taillight and put a meter to it to see if it is getting proper voltage.

Posted on Jan 08, 2009

1 Suggested Answer

roniecon
  • 6826 Answers

SOURCE: 1986 Toyota Pickup Instrument lights and tail lights out

Even though the relay is activated,I assumed you checked the out put?Also,You checked the voltage at the light sockets?With a meter,or test light ,check the fuse for the cluster lps,adjust them to dim,and to bright,the meter should act accordingly on the fuse.If it does not,replace the dimmer control,or head light switch,witch ever controls them.This may allow continuity to the tail lights as well.If the fuse is dead for the cluster lights,replacing the dimmer control,or head light switch will solve the problem,or,from another fuse ,supply voltage to the cluster lp fuse,one that is only hot with the key on,cause if you do this the dash lights will come on,every time you run the vehicle,day,or night.

Posted on Dec 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dashboard and rear tail lights not working changed rear taillight bulbs and fuses was wandering if a blown bulb in the dashboard effects my no taillight problem


Dash, tail, and park lights are out - CarGurus

www.cargurus.com > Questions > Ford > F-150

CarGurusMar 19, 2013 - On the way to work I get pulled over, no tail-lights. ... Your ground is good because your other lights are working. I would .... hey my #6 fuse keeps blowing..no tail lights no dash lights.. head lights brake lights work fine.. also ...

No Dash lights, tail lights or Marker lights But Headlights, brake ...

forum.ih8mud.com > Forums > Toyota Tech Forums > 80-Series Tech
Dec 6, 2014 - I pulled over checked the fuses and again the Tail light fuse was out Put a new one in nothing. Now my taillights don't work but Brake lights, ...

Dash lights and running lights not working after installing ...

? 1:25
https://www.youtube.com/watch?v=SK36wPXo2EQ
Feb 11, 2014 - Uploaded by 4Runner Nation
I came to discover that the dash lights and running lights nolonger work. ... my brake lights and headlight i ...

I have no dash lights or tail lights - JustAnswer

www.justanswer.com > Buick

Jan 14, 2016 | Cars & Trucks

3 Answers

Tail lights on trailer not working f250


did you check the trailer /tow fuse under hood in truck? located lfet side rear near firewall top. should be fuse for towing / trailer.DW Mylin

Dec 01, 2012 | 2008 Ford F 250 Super Duty 4WD

2 Answers

Taillights wont work 1984 GMC sierra


I would start with the fuses,Check under the dash in the fuse box. Make sure all fuses are good. If there is a blown fuse then replace it, If the fuse blows then you may have a short in the wiring to tail lights, also check wire connections at the rear bumper area.
I have seen the connector go bad, test power going into and coming out of connector to tail lights. if there is a trailer hitch on this truck then check where the hitch wiring was connected , check for bad connections.
If the front park lights work then it may not be the light switch but rather a bad wire.Here is a wiring diagram to help you.
have a good day and i hope this is helpful. If there is something else i can help with please let me know.3_6_2012_5_22_32_pm.gif

Mar 06, 2012 | GMC Sierra 2500 Cars & Trucks

2 Answers

Inside dash lights and tail lights won't turn on in my '95 Isuzu Rodeo, what can I do?


My 97 Rodeo had the same problem. No Tail lights, no. Dash lights. There is also an annoying buzzer that goes with the set telling you the lights are on, there is no key in the ignition and your door is open. (you don't notice it when it's gone but you sure notice it when it's back)
The Fuse (taillight Illum) was good, The Light relay under the hood was good and all bulbs were good.
What fixed this problem was replacing the tail light relay which is located in a panel just to the left of the brake pedal also called the kick panel.Inside there are 3 relays. I replaced the one in the middle and got everything to work.
If you need to identify the relay you can put your hand over it and then turn the lights on and off. The correct relay should click. Mine was the middle one.
Hope this helps someone because it stumped me for months.

Oct 06, 2010 | Isuzu Rodeo Cars & Trucks

1 Answer

My 2003 Pontiac Vibe tail lights do not work. The brake lights work. I checked the tail fuse. Turn signals work also. Why no tail lights?


Your turn signal lights and brake lights are the same lights . Question : do the front parking lights work ? The front and rear running lights or parking lights are all on the same circuit and fuse . If the front lights work , and the rear lights don't , make sure the bulbs are good first . If OK , I would suspect the problem is either a bad ground in the rear taillight wiring harness or a bad connection in the rear taillight connector Itself .

Sep 16, 2010 | 2003 Pontiac Vibe

1 Answer

1986 Toyota Pickup Instrument lights and tail lights out


Even though the relay is activated,I assumed you checked the out put?Also,You checked the voltage at the light sockets?With a meter,or test light ,check the fuse for the cluster lps,adjust them to dim,and to bright,the meter should act accordingly on the fuse.If it does not,replace the dimmer control,or head light switch,witch ever controls them.This may allow continuity to the tail lights as well.If the fuse is dead for the cluster lights,replacing the dimmer control,or head light switch will solve the problem,or,from another fuse ,supply voltage to the cluster lp fuse,one that is only hot with the key on,cause if you do this the dash lights will come on,every time you run the vehicle,day,or night.

Dec 20, 2009 | 1986 Toyota Pickup 4WD

1 Answer

Only headlights work, 91 4dr EX


ok supaxang, could this solution be as simple as replace the 2 rear bulbs? The brake light and tail light (parking light) are the same bulb, 2 filaments, one for brakes, one for tail lights. If the the tail light filament burns out, the brake light will continue to work ok. It is quite possible that both tail lights burned out, and the brake light filaments are good and still working. Replace w/ bulb #2057. Let me know if this fixes it, if not, I'll keep working on it.

Oct 21, 2008 | 1991 Honda Accord

Not finding what you are looking for?
2002 Chrysler 300M Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...