Question about 2002 Chrysler 300M

1 Answer

My taillights wont go on when all the other ones are working, i've checked all the fuses. What could be wrong?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 163 Answers

Have you tried changing the bulbs?

Posted on Jan 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 vw gti. reverse lights, trunk latch wont open and rear wiper have stopped working. taillight turn signals brakelights work.


Sounds like you have one or more blown fuses. Check the fuse panel for anything that looks blown and replace the fuses. If all fuses are good then there is likely an issue with a wiring harness.

Apr 21, 2013 | Volkswagen GTI Cars & Trucks

1 Answer

Keep blowing taillight fuse on 1995 jeep xj sport country


The taillight circuit includes the front parking lights.
You would need to take the bulbs out and check each socket for a short to ground.

Jul 31, 2012 | Jeep Jeep Cars & Trucks

3 Answers

How to change a tail light bulb in a honda element


Open the hatch and the tailgate.

Remove the two mounting screws with a Phillips-head screwdriver, and remove the taillight assembly from the body by pulling it back.

Determine which of the three bulbs is burned out: brake/taillight, turn signal light or backup light. (I assume you’ve already determined this)

Remove the socket by turning it one-quarter turn counterclockwise.

Pull the bulb straight out of its socket.

Push the new bulb straight into the socket until it bottoms.

Reinstall the socket into the light assembly by turning it clockwise until it locks.

Test the lights to make sure the new bulb is working.

When reinstalling the taillight assembly, first place the two pins in the holes in place. Tighten the two mounting bolts.

Hope this is helpful to you.

Jan 10, 2010 | 2003 Honda Element

1 Answer

Only one headlight will work and the taillights wont work but the break lights do


sounds like there fusing out somewhere, has water got onto the wires? go to where the wires join the lights and check for green coriosion ,if not trace wires back checking on the way(pain in the *** i know)

May 04, 2009 | Nissan Pickup Cars & Trucks

2 Answers

New stereo = no taillights


lot of time you get the wrong wire. the wire for the dash lights.if that wire is hook up it will blow the fuse

Mar 19, 2009 | 1997 Chevrolet Malibu

1 Answer

Tail lights wont work


The light bulbs went bad. Or the wiring to the lights it bad. Take out the taillight and put a meter to it to see if it is getting proper voltage.

Jan 08, 2009 | 2002 Chrysler 300M

1 Answer

Taillights wont work on 91 s-10 blazer


look for your main box there should be a fuse for your taillights check for continuity use a test light,but if does voltage check the wiring for voltage,ground that goes to the taillights after checking for voltage and ground and figure out if it has voltage or a good ground then if all the test and figure that it has those the only way is the bulb that causing it so go buy one......

Dec 18, 2008 | 1991 Chevrolet S-10 Blazer

1 Answer

Taillights and dashlights wont work


you have a badb headlight switch. it controls the head lights and dash lights

Nov 23, 2008 | 1994 Ford Escort

Not finding what you are looking for?
2002 Chrysler 300M Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...