ALL YOU HAVE TO DO IS BUY YOU AN NEW THERMOSTAT GASKET SET AND SOME HIGH TEMP GASKET GLUE REMOVE THE TWO LITTLE BOLTS PUT THE NEW THERMOSTATS AND GASKET AND GLUE GOOD AND MAKE SURE NOT TO OVER THIGHTEN IT BECAUSE IT WILL STRIP EAZY THAT ALL TO IT I HAVE THE SAME YEAR MAKE AND MODEL
SOURCE: remove front door panel on 1995 merc grand marquis
http://www.autoclinix.com/Mercury/Front%20Speakers2.htm
SOURCE: misfire on cyl no 1 on a 01 merc grand marq
Run your tests before you start buying your parts. verify that your fuel pressure is acceptable. a defective fuel pressure reg., clogged fuel filter, tired fuel pump, fuel injector, loose or damaged wiring to the injector or coil, maybe water in the gas or too much fuel cleaner/additive.
SOURCE: engine light on 2003 Grand Marquis code p 2197 "lean"
the very 1st thing u do is have the trouble code checked that turned on the light, there are well over 200 possible reasons for a check engine light, a fuel filter is not one of them.
SOURCE: what are the igniton timing,firing order, spark
1998 Mercury Grand Marquis
4.6 liter V-8 VIN "W"
I will get you the rest of the info in just a few hours...I am at work!
SOURCE: how do I change the thermostat 2000 grand marquis
It needs to sit in a recess in the housing, typically if you are asking the question that you are asking, the thermostat housing may be bent or cracked. If it is nto installed correctly, it kills the housing...Must be perfectly true, and sqaure....
I am not sure about the gasket, if it came with, use it, some designs use o ring to seat the thermostat, others use o ring as seal...
i normally seal it anyways...
469 views
Usually answered in minutes!
×