Question about 1997 Ford Taurus

1 Answer

Ford taurus sho misfire cylinder1

The cylinder still misfires after I swaped the ignition coil from #2 to #1 and the cylinder still misfires showing in cylinder#1 so the problem is not in the coil so I cant seem to find the solution and Ive been trying for months. I also put lucus injecter cleaner along with dry gas and just to see if the injecters were clogged and the car still misfires granted the injectors are brand new.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

I may not have the answer but I had a similar problem with my 97 taurus, for me the problem was the Oxygen sensors they needed to be replaced. If you havent done that maybe try it or ask a mechanic if that might be the problem

Posted on Jan 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No spark on cyl 3 and 4


What engine ? 2.2 l or 2.4 L. You don't say if any codes are set. no P0303 - P0304 cylinder's 3 & 4 misfire ? or any other ? No the cam sensor wouldn't cause just two cylinders to misfire. The PCM triggers the ICM to turn on an off coil's to build up an collapse the primary voltage inducing the secondary voltage . This engine is equipped with a non-distributor ignition system called the electronic ignition (EI) system. The primary circuit of the EI system consists of the following components:
?€¢
Two separate ignition coils

?€¢
An electronic ignition control module (ICM)

?€¢
A crankshaft position (CKP) sensor

?€¢
Related connecting wires

?€¢
The ignition control (IC) portion of the powertrain control module (PCM)
Important: The camshaft position (CMP) sensor is only used for a misfire detection. It is not part of the ignition system. !
How to Test the Ignition Coils GM 2 4L Quad 4

Jan 24, 2015 | 2001 Chevrolet Cavalier

1 Answer

Misfire on cylinder 2


yes,that will work.

May 25, 2013 | Ford Cars & Trucks

2 Answers

My check engine is on test show #3 cylinder misfire. spark plug good,coil good, injector good. could vacuum leak be the problem?


sure would have to be a pinpoint leak over that particular cylinder. it would show random misfire. how was the coil checked? if the plug is good try swapping the coil with another cylinder clear the codes and see if it resets to the next cylinder if so the coil pac you just swaped is having a random misfire and needs replaced. hope this helps

Jan 25, 2011 | 2005 Chevrolet Colorado

3 Answers

I have a 05 VW Pessat with a 1.8L 65K miles on it. I have a random misfire and surge at idle. Code's set: P0300, P0301, P0302 and I seen P0303. This misfire comes and goes. Does not have a dead miss. I...


Try the crank pisition sensor that is vary likely to be the couse of your misfires its working but its intermintly shorting out telling the pcm that you have a misfire and setting the codes

Nov 22, 2010 | 2004 Volkswagen Passat

1 Answer

Vsc & check engine light on. Code reads cylinder 2 misfire I have changed the plugs swaped coil with another cylinder swaped vsv's swaped injector plugs with another cylinder always shows misfire #2...


You may need to look at your exhaust system. If you have a leak, your O2 sensors will send the wrong reading to your engine which will in turn tell your engine to fire differently. Your code will come up reading as a misfired bank. See if you have an exhaust leak first, then see about changing out the O2 sensors behind the leak.

Jun 21, 2010 | Cars & Trucks

1 Answer

I have 1996 Dodge Gran Caravan, and it gives me these codes: 27 and 43, what do they mean??


CODE 27 - Injector Control Circuit, output driver does not respond properly to the control signal

Code 27 MIL light options: OBDII
P0201 - Injector #1 Control Circuit
P0202 - Injector #2 Control Circuit
P0203 - Injector #3 Control Circuit
P0204 - Injector #4 Control Circuit
P0205 - Injector #5 Control Circuit
P0206 - Injector #6 Control Circuit

CODE 43 - Cylinder Misfire, or Ignition Primary Circuit

CODE $# MIL options: OBDII
P0300 - Multiple Cylinder Misfire
P0301 - Cylinder #1 Misfire
P0302 - Cylinder #2 Misfire
P0303 - Cylinder #3 Misfire
P0304 - Cylinder #4 Misfire
P0305 - Cylinder #5 Misfire
P0306 - Cylinder #6 Misfire
P0351 - Ignition Coil #1 Primary Circuit
P0352 - Ignition Coil #2 Primary Circuit
P0353 - Ignition Coil #3 Primary Circuit

Feb 03, 2010 | 1996 Dodge Caravan

2 Answers

Cylinder #1 misfire on a Ford Taurus SHO


Did you check the condition of the spark plug? If the plug is good do a compression check; a very low reading could indicate a sticking intake valve (sticking open). The easyest and cheapest way to fix a sticking valve is to introduce 1/2 can of Sea Foam into the air intake manafold; just follow the instructions on the can except you will use 1/2 can instead of 1/3 can. That Yamaha motor from what I have found collects tons of gunk on the valve stems. Good luck.

Jan 08, 2009 | 2003 Ford Focus

Not finding what you are looking for?
1997 Ford Taurus Logo

Related Topics:

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...