Question about 2001 GMC Yukon XL

1 Answer

Light replacement Replacing the license plate light on the rear bumper of a 2001 gmc yukon xl.

Posted by on

  • 2 more comments 
  • tbar3000 May 05, 2009

    license plate lights do not work. bulbs are good. manual does not show a fuse specifically for this . other lights work ???????

  • Anonymous Mar 22, 2014

    Need to locate all fastners that attach rear bumper cover on an 07 Yukon

  • Anonymous Mar 24, 2014

    Reverse lights stay on all the time

  • Anonymous Mar 30, 2014

    car will not start right off. Takes several tries. I have replaced the battery and Alternator.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 196 Answers

Just reach behind the bumper and grab the light/electrical harness and twist is either way and then it should pull out put in a new 194 bulb and you are set.

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My parking lamps wont turn off when I shut my 2000 Yukon xl nor will my license plate lights


Sounds like the reverse switch on transmission linkage is stuck or bad.

Feb 17, 2015 | 2000 GMC Yukon XL

1 Answer

Replace license plate light


With step bumper,
  1. Release the lamp's retainer from the rear bumper by pulling the lamp up and tilting the bottom of the lamp away from the bumper.
  2. Remove the lamp from the rear bumper by rotating it clockwise or counterclockwise

Oct 23, 2013 | 2001 Chevrolet Blazer

1 Answer

2002 gmc Yukon denali Left head light only works on Hi-beam. Also left licenses plate light not working as well


i would try replacing those bulbs,the headlights are dual filiment and can work on just high beam and not on low beam,so start there and replace your bulbs

Sep 30, 2010 | 2002 GMC Yukon Denali

1 Answer

How to remove spare tire from 2003 gmc yukon xL i know that their is a key incert at the rear of the trucks bumper. then what happens.


You need to dig out the jack and tools .. The spare is held in place by a cable winch that needs to be cranked down.

Jul 24, 2010 | 2001 GMC Yukon XL

1 Answer

2001 GMC Yukon XL


YOU CAN GO DEALERSHIP OR THE SALVAGE YARD PROBABLY HAVE A WASHER FLUID TANK AND HOSES IN GOOD SHAPE.

Mar 23, 2010 | 2001 GMC Yukon XL

1 Answer

U-joint repalcement for 2001 yukon xl


Mark your drive shaft coincidenly with the rear axle and tranny. Remove drive shaft. Press out the old u joints and press in the new. You will need a torch for heat and a lot of patience. Have fun!

Jan 17, 2009 | 2001 GMC Yukon XL

1 Answer

How do you change the bulbs in the license plate lights on a 2002 yukon xl?


There is a small plstic cover over the bulb housing with two screws. Remove both screws, pop off the cover and expose the burned out bulb. You will just need to pull on the bulb. I suggest you pull carefully so as not to break it, but it is just a slip in so keep pulling until it releases. By the way the replacement bulb is a size 168.

Dec 10, 2008 | 2002 GMC Yukon XL

3 Answers

2002-2006 Denali front bumper fit on a 2001-2006 Yukon


Yup - you may need to get the grilles and such as well...

May 18, 2008 | 2001 GMC Denali

Not finding what you are looking for?
2001 GMC Yukon XL Logo

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...