Within three months I visited the garage twice and tomorrow wil be my third for the same problem: my wipers fonction normally at times, at times they get slow and sometimes stop. We are having one snowstorm after another in my area this winter and this problem really upsets me as I drive long distances. First the mechanic changed the pivot, than the wiper motor for a brand new one but the problem remains the same. What's worse they seem to have no clue as to what else besides the pivot and the motor might be the problem. Please help.
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: Tercel 92 wiper problem
Your wiper motor has the relay incorperated into it so the only thing left is to make sure the ground for it is tight. Also could be a loose wire somewhere. Take the connector off and put a volt meter on the hot wire. Have someone turn the key and wipers on. Look at the voltage. Is it a stable 12 volts all the time? Let me know what you find.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 4:54 www.youtube.com/watch?v=P3TqheRsX1w
Sep 25, 2013 - Uploaded by Honda Civic How To
Hi in this first video i will look at how you can easily change a failed bulb in a 2001-2005 Honda civic's hazard ...
honda-tech.com/honda-civic.../%5Bdiy%5D-92-00-civic-rear-hatch-glas... [DIY] 92-00 Civic REAR Hatch Glass Intermittent Wiper Retrofit Guide ... The answer lies in a 1997 Honda CR-V. So the 98+ CR-V models all had their rear ... Remove the Rear Intermittent Washer/Wiper Relay from the under-side of the dash, ...
Your wiper motor is not for this model or its faulty ,but do check this out and no its not a fancy web site ,now gain access to the motor then disconnect the central drive and then put the wiper arms in the correct position for park now reconnect the drive arm .This is what happens in a lot of modern garages ,they employ 18 yr olds for cheap labour with no skilled supervision ,all these lads want to do is walk around with laptop under arm and clean fingernails .makes my old ticker race just thinking about all this and my ulcer start hurting ,get so much incompetence from garages in within the questions i answer on here .
The windshield wiper circuit has an circuit breaker in it, under heavy load this breaker trips to protect the wiper motor, when the motor cools, the breaker resets automatically restoring proper wiper action.
First check your wiper fuse, it is located in your fuse box. The labels of the fuses are all printed on the cover to help and guide what fuses are being use. Note the amperage of each fuse when your going to replace it!
this could be a result of the linkage coming apart this is located under the cowel and not easy to service. It could also be a result of bad splines between the wiper arm adn wiper arm shaft. if the later is the case you can sometimes tighten the 15 mm nut that holds the arm to the shaft. but this will only work once or twice before the arm requires repolacement. remember folks, wipers are your friend in the winter, they are not ice chippers or snow plows, always clear your windshield with an ice scraper and make sure the wiper blades are not frozen to the glass. this small form of torture in the cold will save you big $$$ in the auto repair shops.
I had the same problem. The problem is in the switch (wiper, turn signal, hi-beam, hazard switch - multi-function switch). The part number is S14349 from BWD. My wipers wouldn't turn off and sometimes headlights wouldn't turn on unless I held the hi-beam switch back for about 5 seconds. After I changed the multi-function switch, the wipers still came on twice, but have been fine since (about a month). I don't know if it helped, but after I changed the switch, I pulled the top cover off the wiper motor housing (under hood against firewall right in front of driver - you have to remove hood weather stripping on top of firewall), checked the electrical connection to motor and also pulled up on ground strap checking the make sure I had good contact with the grounding strap. After I checked all that, the wipers came on once by themselves but I could actually turn them off and they have been fine since (don't know if there was some type of memory that caused the wipers to come on after I changed the switch, but they have been fine since then). Hope this is helpful.