Question about 2002 Mazda Millenia

1 Answer

Transmission delay in shifting

My 2002 Mazda Millenia S is not shifting properly. Shifting from 1-2 there is a delay, and then when it drops into gear it clunks......all other gears shift smoothly.. Can this be helped by a tranny oil flush ? It hasn't been flushed in a long time. Also, I recently had my front axle and CV joints replaced....could it be related ?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

A transmission flush is a good place to start

Posted on Sep 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 gmc envoy denali transmission shifting delay


have your pedal sensor check and TPS scan for error code and your transmission fluid level and your T/M shifting module scan for error codes

May 27, 2014 | 2006 GMC Envoy Denali

1 Answer

2002 mazda millenia s


Dwight, sounds like you are having some trouble with the torque converter. Check the fuild level and maybe even change the fluid and filter. When it does shift does it shift normal or hard?

Jan 10, 2014 | Cars & Trucks

1 Answer

Transmission problems


It could be a sign of bad transmission solenoid. If so, your vehicle has trouble shifting into drive or reverse. Normally, when you start your car, you're able to shift into drive or reverse right away. With a bad transmission solenoid, the vehicle could have a delay of a few seconds, or even take several minutes to warm up and operate properly. During this delay, the vehicle will act similar to how it behaves in neutral. It won't stay in park, and when you press the gas pedal, the vehicle will make an engine revving noise but not move.

Oct 03, 2013 | Toyota Avalon Cars & Trucks

1 Answer

2002 Mazda Protege 5 Transmission shifting issue


yep ck u tube for a few ways to find the vaacuum leak. theres several ways

Sep 18, 2012 | 2002 Mazda Protege

1 Answer

Jeep 2002 Grand laredo have delay shifting gear


Have you checked the trans fluid? Has to be checked with engine running in neutral. If its good you will need to bring it to a transmission shop. Good luckHowie

Apr 20, 2012 | 2002 Jeep Grand Cherokee

1 Answer

MY 1998 MAZDA MILLENIA'S TRANSMISSION IS GIVING ME PROBLEMS, IT ROLLS BACK WARDS WHEN IN DRIVE ON A HILL.


Go 2 a Ford dealer parts dept. Ask 4 a bottle of: Motorcraft Additive Friction Modifier. STINKS REAL BAD!!!! Usually used in differentials but will lubercate transmission if added into trans fluid tube and vehicle driven shifting thru the gears to get mixture worked into all parts. If this doesn't work you might need tp drop the pan from the tranny & replace the filter and the fluid, if so have pan ready to catch fluid when u break loose 1 side! Jiffy lube can do this & power flush the tranny, if required. Otherwise mechanical problem for tranny repair shop.

Nov 07, 2010 | 1998 Mazda Millenia

1 Answer

I have a 2002 mazda millenia. It is pulling codes regarding shift sensors. At cruising speeds it feels as if you downshift suddenly or possible like it isn't getting fuel for a moment. We have replaced...


Can't solve, but, had the same problem. Replaced everything the codes indicated. Drove a couple of weeks and the transmission went. Third gear is gone.

Almost $ 2000.00 to chase the codes, now the transmission is going to cost $ 2,700.00 to rebuild.

Take car to a trans. shop before the transmission burns up and the rebuild will be less!!!!

Oct 13, 2010 | 2002 Mazda Millenia

1 Answer

Mazda 6 gears jerking between 80-100km.. the transmission was recently refurbished by local dealer but they seemed to be lost what could this be?


Check you tranny fluid make sure its full.Also check if its not leaking into the gears making them to slip while changing gears. Also as the transmission job is done.Make sure the transmission is aligned properly. If you feel a strong **** or clunk while shifting, the car may have a transmission problem. Every gear should shift smoothly and easily without any noises or jerks. If still the same problem then its the transmission problem it has to be replaced.There are many many other users facing the same exact problem in Mazda -6 cars.That mazda is having transmission problems, they had it on the 6 and they now have a new program to upgrade the car software to fix the shifting problem .Ask you car Mazda dealer about the updated program for this transmission shifting problem. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Jul 17, 2010 | Mazda MAZDA6 Cars & Trucks

2 Answers

Delay in Shifting


its something called the transmission control unit, first it start with delaying in shifting, then when you shift to revers and push the gas you hear a bang sound and the car battles to revers, it costs around 1500$

Jul 28, 2008 | 2002 Audi A4

Not finding what you are looking for?
2002 Mazda Millenia Logo

Related Topics:

853 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...