Question about 1995 Mitsubishi 3000GT

1 Answer

Iat sensor does a 1995 3000gt 3.0lt dohc have a intake air tempature sensor?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 379 Answers

Yes and No , It does, however it is integrated into the Mass Airflow Sensor . So its not per say a separate component that you can replace without replacing the MAF unit .Excuse me , Mitsubishi wants to call it the "Volume Air Flow Sensor" , not Mas Airflow Sensor , as we know it . . I stand corrected .

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 hundai santa fe 2.4l with p00113 code,How to check intake air tempeture sensor?


Before I give you my answer I need to advise you, if you have an aftermarket/performance air intake, it will trip an IAT code pretty often, you will either have to live with it or try to find a "dummy" sensor (a fake IAT sensor designed for cold air intakes that will make your engine computer think the incoming air is a certain temperature) if you dont have an intake:

Chances are if the IAT code is coming up (assuming you do not have a cold air intake system) your IAT sensor is probably bad. There is a very long and tedious process of testing the sensor and the circuit for the sensor, but with the average price of a new IAT sensor being around $12 I pretty much always suggest just replacing the sensor. On your vehicle the IAT is part of the mass air sensor assembly, but can be replaced independanlty, and shouldn't be a very difficult replacement.

Apr 07, 2015 | Cars & Trucks

1 Answer

Undefinedas replacement on civic 98 sensor p0113


Possible causes for this code are: - Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection. this code sets when: - An excessively high voltage from the sensor is sent to ECM. Usual Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P0113 1998 Honda Civic Description The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM).The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.
27782.png

Sep 24, 2014 | 1998 Honda Civic

1 Answer

Where can i find intake air tempature sensor on 2003 1.6 matrix


Typically speaking, IAT sensors are on the back side of the intake airbox.

Feb 07, 2014 | 2005 Hyundai Matrix 1.6

1 Answer

Installed an aftermarket air filter kit and now have a code of PO113


Have you tested your IAT (Intake Air Tempature sensor) ? Did you install in your new cold air intake? The P0113 code sets when it senses an air temp of -31 degrees F for more than 5 second . If you test your IAT with an ohm meter it should have continuity at room temp. the warmer it is the less resistance it should have. the colder it is the more resistance it should have. If you have no continuity the IAT is bad and needs replacing.

Jan 26, 2012 | 2011 Chevrolet Camaro

3 Answers

Where is the IAT sensor


The Intake Air Temperature (IAT) sensor is the same as the Manifold Air Temperature (MAT) sensor on earlier models. IAT is located in or near the air intake duct (click image for zoom).

zjlimited_1343.jpg

Fig.: On 1996-98 vehicles, the IAT sensor is mounted in the rear air intake duct


Hope this helps (remember to rate this free answer).

Jun 03, 2011 | 1997 Pontiac Bonneville

1 Answer

Exact location of the iat sensor on a nissan pathfinder 1996


The Mass Air Flow (MAF) sensor/Intake Air Temperature (IAT) sensor is located in the air cleaner case.
// // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 34; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]>

The Intake Air Temperature (IAT) sensor is an integral part of the Mass Air Flow (MAF) sensor. Looks like this:



c17hydro_18.jpg

c17hydro_19.jpg

May 12, 2011 | Nissan Pathfinder Cars & Trucks

1 Answer

Where is the IAT sensor for a 99 5.9 diesel ?


The two-wire Intake Manifold Air Temperature (IAT) sensor is installed in the intake manifold with the sensor element extending into the air stream:
  1. This is a Negative Thermal Coefficient (NTC), meaning that as the manifold air temperature increases, the resistance (voltage) in the sensor decreases, and vice-versa.
  2. The IAT sensor provides an input voltage to the PCM, indicating the density of the air entering the intake manifold based on intake manifold air temperature. When the ignition is turned ON , a 5-volt power circuit is supplied to the sensor from the PCM. The sensor is grounded at the PCM through a low-noise, sensor-return circuit.
  3. The PCM uses this input to determine:
    Injector pulse-width (air: fuel ratio) Ignition timing (to prevent spark knock)

3431fa4.jpg

Fig. IAT sensor installed in the intake manifold of a 5.2L engine. Others similar

Oct 04, 2010 | 1999 Dodge Ram

1 Answer

IAT sensor on 1997 cadillac el dorado


  • P0110 - Intake Air Temperature (IAT) Sensor Circuit
  • P0111 - Intake Air Temperature (IAT) Sensor Performance
  • P0112 - Intake Air Temperature (IAT) Sensor Circuit Low Voltage
  • P0113 - Intake Air Temperature (IAT) Sensor Circuit High Voltage
  • P0114 - Intake Air Temperature Circuit Intermittent ,hope this helps you
  • Jun 14, 2008 | 1997 Cadillac Eldorado

    Not finding what you are looking for?
    1995 Mitsubishi 3000GT Logo

    Related Topics:

    155 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mitsubishi Experts

    yadayada
    yadayada

    Level 3 Expert

    61168 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Mitsubishi Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...