Question about 1997 Ford Probe

1 Answer

Washer bottle warning light stays on

1995 Ford Probe, i don't have the owners manuel so can't check to make sure the washer bottle warning ight is the warning light for that or if it's something else. As i have filled the bottle up and the warning light stays on. I can't find anything showing me a diagram of the warning lights on the instrument panel can anyone help thanks

Posted by on

  • amandacraig6 Jan 08, 2009

    thanks for the help, but on my probe , only the spout of the washer botle is showing the rest of it seems to be enclosed so i cant see any sensor, many thanks

  • Anonymous Mar 18, 2014

    Says to fill the water bottle al the time



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The sensor for the washer bottle level is in the washer bottle simply unplug the sensor located at the washer resavor and the light will go off then replace sensor

Posted on Jan 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

The windshield washer fluid is full but the light is still on

There is a sensor in the washer fluid bottle . like a float ,when rises to the top it turns off the light. It mite be stuck or bad.

Dec 26, 2014 | Cars & Trucks

1 Answer

I have a 95 ford probe the check engine light comes on and off. No knocking or any obvious leaks. Transmission is acting up a little put some fluid in it made it run better. Not sure why check engine light...

something that might help if there ant nothing wrong discont battery + and - termanls then put them back on something car just need a reset srry about bad spellin tired

Nov 26, 2011 | 1995 Ford Probe

1 Answer

I have a 97 ford probe 4cyl. I'd like to adjust the tps with a voltage meter, but want to be sure I do it right! My check engine light isn't on but car idles rough. I've had the tps replaced in...

wheather your a2 .0 or 2.5 at idle key on engine off its is 0.7V to 1.1 V. you test it by doing a sweep, with your volt meter,voltage should increase with smooth throttle movement there should be no drop out or glitches and at wide open throttle you should reach 4.5 V , (***) wide open throttle

May 07, 2011 | 1995 Ford Probe

1 Answer


See and look for abs light link. Be sure you are on the correct page for cars with an accumulator.
I think the washer bottle is removed after taking out the inner fenderwell.

Apr 11, 2011 | 1990 Saab 9000

1 Answer

Need to know what fuses go where on a 2002 ford ranger edge pickup.Don,t have a owner manuel

Check in THIS LINK to looking the right Owners Manual that you need: Ford/owners_manuals

Hope this helps (remember to rate and comment this).

Nov 22, 2010 | Ford Ranger Cars & Trucks

3 Answers

Ford galaxy 1996 v6 ghia x warning light at temp gauge flashes all the time

If this is a red flashing light beneath the temperature guage it means that you do not have enough coolant. Top up the large white ball shaped reservior at the right hand side of the engine compartment just behind the battery.

Oct 28, 2009 | 2006 Ford Laser

1 Answer

1995 ford mustang break lights do not work.

get a manuel from an auto parts store. in this manuel it will have etm(electrical troubleshooting manuel) it shows the brake lights and wires colors of wires. trace the wire color from the fuse using the diagram. purchase a test light from wal mart to see if your wire has power. if it does there may be a bad connection or component but hte etm shoud show you what components are on the circuit.any questions email me at

Dec 31, 2008 | 1995 Ford Mustang

1 Answer

Cherokee warning light

you water level in your windscreen washer bottle is low check all water levels it is go practice to check all water and oil levels once a week

Dec 27, 2008 | 1995 Jeep Grand Cherokee

1 Answer

Fuel cut off light

there is a fuse and a relay that need to be checked they are located in the fuse box under the hood. if there is a cut off it will be located in the trunk behind the fabric.

Jul 29, 2008 | 1995 Ford Probe

Not finding what you are looking for?
1997 Ford Probe Logo

Related Topics:

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5653 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides