Actually there is it looks like one unit though. It is held on buy one of those red saftey clips that you can find throughout the car. You have to push that some(some of those clips come right out this one i remember right does not. if i remember right it needs to be pushed up. It is a pain i had 2 of these neon and both the fans melted down needing replacement.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Nikki is the engine light on, are there any codes,have you had a tune up or any other work done lately.when you say it won't start when warm(do you mean engine will not turn over, or does engine turn and refuses to fire.
If I had to guess failing fuel pump, they tend not to build fuel pressure when ran a while(warmed up) and when left to cool build somewhat better pressure.
press the helpful button
sounds as if you have some bad cooling fan motors.need to make sure the power and ground are being supplied before condemning the fans. dodge vehicles are common for circuit problems for cooling fan control.
You need to first disconnect the batt. ground. Apply the E-Brake and chock one of the back wheels because you may need to raise the car. Then unplug the fans and take out the screws that hold the fans in at this point the fans should come out.. Of course drain the radiator you don't want coolant on the ground. Now disconnect your tranny lines and radiator hoses.While doing this if the hoses are old replace them since they are off. At this point the radiator should come out..Of course reverse the process to install.
hey u may have figured it out already ,but if u look under the head rest u should feel the two long iron poles going into the head rest on one side of one of them theres a button that blends rite into the design of it so look carefully