Tape jammed in my car cassette player

please follow this steps and fix it. God bless you

Cleaning the Radio may fix it but what it sounds like is there is a lever inside that got jammed and you have to take the player apart to get it to work again.. Cheaper to get a new one

They aren't in the same family are will never work together! Take it back!

go to www.reliable-store.com you will get all info and
solutions there definitely

if you are pouring gas in the carb you don't have fuel injectors. Its one or the other. Sounds like your fuel pump is bad

The radio checks to make sure the drive capstan is turning - if not, gives the E10 error. Either the drive belt in the radio is slipping or the drive wheel in the adapter is sticking. If it does it with a real cassette, then it's probably the drive belt. If not, you can try to figure out why the wheel in the adapter is not turning freely.

sling it its had its day,most likely its a drive belt broke but its also possible that the mechanism that turn it on inside the tape player has got a plastic clip /switch broke off with age .

your tape player is jamed only way to remove radio and remove radio top cover and back tape out by hand

If the belt is fine then the pinch roller must work to pull the tape with the capstan working.
so please open set and get glimpse to see if the pinch roller is engaging. If not the loading mechanism is not working. you will need to see if the reel drive is also working. So unless the mechansim is checked there is no question of the sound coming out.
So see that the loading engages the pinch roller to pull tape and the reel drive to gather the winding, if not reset loadding mechanism .
However if the tape moves and there is no sound then the head preamp, the tone amp or the output amp can be faulty. You can use a signal test to confirm the section.
credit if this helps

the tape is very tight
get a pen and try to loosen up the tape
100 % is the tape not the radio