Question about 1996 Chevrolet Blazer

1 Answer

Bad brake booster

Need to change a brake booster on a 1996 chevy blazer

Posted by on

  • Anonymous Mar 13, 2009

    brake pedal gets hard and make a whining noise when pushed.

  • John Jon May 11, 2010

    why is your brake peddal hard as rock?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,982 Answers

If you know for sure that the booster has failed, you need to unbolt the master cylinder from it, (sometimes you can move it away enough to not even disconnect lines.) Then unbolt the booster from the firewall, disconnect the pedal linkage if connected to booster. Remove & replace booster assembly and everything else you you took off. If you didn't have to remove master cyl you are done. If removed, bleed master before putting back into service!

Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 chevy blazer when we replaced brake booster and now it will not shift out of park whenits started


Not sure I am following your question, or maybe questions.
If you can not shift out of park with the key on, the brake switch on the pedal may be faulty or out of adjustment.
If the warning light is on, it could be the fluid level sensor in the master cylinder, or the parking brake switch.
If you have no brakes after you try bleeding the master cylinder, the rod inside the booster may not be connected correctly. If you replaced the master cylinder along with the booster, you would need to bench bleed the master before installing it in the truck.

Oct 08, 2012 | Cars & Trucks

1 Answer

Brake issues on 1996 Chevy Blazer


You should check your vacuum lines make sure they are all connected plus the line you keep disconnecting is collasping onto its self which in turn will make the brakes stick so you must have one of the ends plugged.

Jul 25, 2012 | 1996 Chevrolet Blazer

2 Answers

How do i change a brake booster


from autozone.com:

  1. Disconnect the negative battery cable.
  2. Apply the parking brake.
  3. Unplug all necessary electrical connections.
  4. Remove the master cylinder from the booster and pull it off the studs, CAREFULLY! It is not necessary to disconnect the brake lines.
  5. Disconnect the vacuum hose from the check valve.
  6. If necessary, remove the brake light switch.
  7. Disconnect the booster pushrod at the brake pedal.
  8. Remove the booster mounting nuts, located on the inside of the firewall.

24cafd9.gif


Fig. Fig. 1: Vacuum booster mounting

  1. Lift off the booster and remove the gasket.

To install:
  1. Install the booster with a new gasket.
  2. Tighten the booster mounting nuts to 21 ft. lbs. (29 Nm) on all except 1996-98 models. On 1996-98 models, tighten the nuts to 26 ft. lbs. (36 Nm).
  3. Install all remaining components.

Oct 29, 2010 | 1998 Chevrolet Blazer

1 Answer

I have excessive brake travel, and a hard time 98 chevy blazer


Two issues...
The brake booster has a ruptured diaphragm. Replace the booster.
It is located under the hood between the brake master cylinder and the firewall.

Your master cylinder may be leaking fluid internally past the plunger.
Have it examined when you change the booster.

Oct 12, 2009 | 1998 Chevrolet Blazer

2 Answers

1996 chevy blazer


you may want to check fuel pressure possibly fuel pump try banging on the gas tank with a mallet while someone tries to start the car if it is a fuel pump you may be able to get it started but pump will still need to be replaced

Oct 16, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

702 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...