Question about 2000 Buick LeSabre

1 Answer

How to change tag lights

I cant change the tag llights on my2002 buick lesabre please help i just cant get to the bulbs..

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had to remove the entire light bar assy by taking every bolt loose to gain access to replace the tag bulbs on my 2000 Buick Lesabre. It is necessary to replace only one bulb so I replaced all bulbs with the new longer lasting bulbs...the bulbs are not expensive just impossible to gain access to them one at a time. It seems like GM made it so you would have to take it into the GM Dealer. A deep well socket makes the task muck easier! Hope this helps!

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change tag light


Open the trunk. Remove the fabric cover. Remove the ten or so nuts holding the rear lens assembly to the trunk lid. Remove the rear lense assembly from the trunk lid. There are six bulbs, part number 194, in this lense assembly. Two or the lisence plate and four for the tail lights. I would recommend replacing them all as long as you have it disassembled.

Jan 15, 2012 | 2001 Buick LeSabre

1 Answer

How to charge tag light


Vehicles: 2004 Buick LeSabre 3.8L SFI OHV 6-cylinder

From sylvania.com:
License plate light bulbs - 2 compatible tag light bulb types:
(1) 161
(2) 161LL (LL stands for "Long Life")
SYLVANIA Long Life miniature bulbs perform twice as long as any standard miniature bulb. Designed for durability, lower maintenance and greater safety.

These are available online, and also at every auto parts store:
http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Long-Life-Incandescent-Mini-Bulb-Sylvania_5080167-P_1259_R'GRPLAMPAMS___

Since no maintenance manual covers this, do what mechanics do when maintenance manuals fail - get creative.

Unscrew or pry off the lens cover, pull out the License Plate's Type 161 bulb, and insert a new 161 or 161LL bulb, and replace the cover.

Test your installation by turning the ignition key to the "Accessory" position, which will turn on the running lights and the license plate light.

Dec 05, 2011 | 2004 Buick LeSabre

1 Answer

2000 Buick Lesabre custom liscense plate bulb


kind of tricky, took me an hour to get it figured out, but you got to opend the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together

Mar 08, 2010 | 2000 Buick LeSabre

1 Answer

How do I change tag lights on 2002 Buick Rendezous


Open rear door, remove the screws holding the light into the car frame. Pull out the whole light package, you can now easily access the bulbs.

Feb 14, 2010 | 2002 Buick Rendezvous

1 Answer

How to change tag light on 2000 buick lesabre? Or maybe some pictures and discriptions on what to do!


Remove Trunk Inner Panel At Rear of trunk and then gently twist the light electrical plugs and replace bulb.....

Dec 16, 2009 | 2001 Buick LeSabre

2 Answers

Rear license plate does not work


My park avenue has star bit screws on both sides of the plate lights right at the top of the license plate holder. I just chaged them last week. I do not know what size the bit was and I am not sure your car is the same. My car looks just like the car in the picture just longer and a little bigger.

Jun 23, 2009 | 1998 Buick LeSabre

2 Answers

Change bulb right rear blinker 2000 buick lesabre


you have to open the trunk take the carpet off right next to the very back of car undo the 3-4 plastic wing nuts take light off of car change bulb ......reinstall reverse of taking off

Mar 22, 2009 | 2000 Buick LeSabre

1 Answer

How to change warning light bulbs, 97 Buick Lesabre Ltd


bulbs do burn out, but the dash will have places that are not always used for all models. i.e. if your car doesn't have ABS that light will not be used. To replace the bulbs you will need to remove the instrument cluster from the dash. its not to hard to do yourself, two phillips screwdrivers and some patience

Jan 12, 2009 | 1997 Buick LeSabre

1 Answer

Left side brake light stays on and directional will not blink


Incorrectly installed bulb or Wrong bulb Barring No Other Possible Electrical problems such as turn sygnal switch

Jan 08, 2009 | 1989 Buick LeSabre

2 Answers

Break lights


on my buick lesabre you have two star screws right on top of the tail light plate then you take them out you can pull out the whole case and you have all 4 bulbs exposed just turn the case and the socket come out and change bulbs
I hope it helps

Nov 13, 2008 | 1989 Buick LeSabre

Not finding what you are looking for?
2000 Buick LeSabre Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...