Question about 1995 Ford Ranger Supercab

1 Answer

1995 ford ranger coolant leak

Okay i have a 1995 ford ranger xlt 6cyl 3.0L i just had my hoses upper and lower replaced along with the water pump but yet i still have a coolant leak i got under the truck today and looked up under the radiator i can't see any leaks from that. Any ideas??

Posted by on

  • 1 more comment 
  • coleman69 Jan 08, 2009

    nevermind i solved it i gotta wait till payday and get a new radiator

  • Hayward Cowan May 11, 2010

    Sorry about that, I meant to submit it as a solution and not a request for clarification.

  • Hayward Cowan May 11, 2010

    You must be seeing coolant somewhere to know there is a leak.

    I would check every hose clamp and be sure they are tight, it not unusual for one not to be tight enough because the mechanic didn't want to over- tighten it.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Frost plugs on the side of the block or something that you installed may have not sealed. can happen know the drill.

Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 ford ranger


http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?fromSearchPage=true&pageId=0996b43f802c551c&partName=Engine+Coolant+Temperature++ECT++Sensor&partId=0996b43f802c551c I f your coolant temperature is normal and no leaks from water pump,then it could be the coolant temperature sensor,real easy to replace.I will send another link of the part.

Aug 18, 2012 | 1995 Ford Ranger Supercab

1 Answer

Ford Ranger overflow tank bubbling and overflowing, running hot, white smoke, after water pump failure.


The smoke could be the water boiling. Although it is possible that you blew the head gasket, if the vehicle overheated badly, It is also possible that you still have some air in the system. Replace the thermostat and seal /gasket and run the vehicle while adding coolant. Do not install cap on until both houses upper and lower are hot to the touch. This is an indication that the thermostat opened and coolant is actually circulating. Good luck.

Mar 13, 2012 | 1992 Ford Ranger

1 Answer

My ford taurus 1995 was working perfect untill i found a leak at the lower radiator hose by the water pump a fixed and i change the thermostat but now a have a overheating problems, i am wondering if the...


if the leak was near the lower radiator hose then most likly the water pump is bad. The thermosat is located on the upper radiator hose, and as long as it was installed the correct way there should be no issue there.

Mar 02, 2011 | Ford Taurus Cars & Trucks

2 Answers

Coolant leak - 1981 Ford F-150 straight 6cyl., no AC


from what you describe I am sure it is the water pump that is leaking, check the pump bearing for play to confirm

Jun 04, 2010 | 1981 Ford F 150

2 Answers

Theres coolant leaking from somewhere i cant see i know its not from the radiator or or hose unless there's another hose i cant see. the leak is located under the motor mount running down the tranny on...


really this could be one of several issues, does the vehicle run Hot, are you having to fill the reservoir with water or coolant, there is a hose that runs from the cap (overflow hose) to the reservoir, in addition to the upper and lower hoses, finally the water pump. the water pump is equipped with weep holes, which allow fluid to weep out when the pump is bad. finally the thermostat, hopefully one of these can solve your issue, good luck!

Sep 18, 2009 | 1995 Honda Accord

3 Answers

1995 Ford Ranger Splash Model had water pump


you already have two solutions where you posted this before...as an afterthought to my original solution, I also suggest checking pump bolts to make sure they are all tight (don't go overboard with this and snap any, just make sure that they are not easily turned.)

Sep 07, 2009 | 1995 Ford Ranger Supercab

2 Answers

Car began overheating, so we added antifreeze and water. Then the next day, it all leaked out. Upper hoses appear to be ok. Are there lower hoses?


It should have a lower hose also. Or you could check around the water pump, they have a weep hole on it and they usually leak if the pump is bad.

Jul 09, 2009 | 1991 Ford Tempo 4 Door

1 Answer

Thermostat location and replacement


please rate as fxed if this helps.

Thermostat, Water, 3.0L Aerostar and Ranger Removal
  1. Drain cooling system.
  1. Remove upper radiator hose (8260) from water outlet connection.
  1. Remove two retaining bolts.
  1. Remove water outlet connection and water thermostat (8575) as an assembly.
  1. Discard gasket. Clean sealing surfaces with gasket scraper. Gouges in aluminum could form leak paths. Use care when scraping thermostat housing-to-gasket mating surfaces.
Installation
  1. Make sure sealing surfaces are totally free of gasket material.
  1. Install water thermostat into thermostat housing as illustrated.
  1. Position gasket onto thermostat housing using bolts as holding devices. Install water thermostat and tighten bolts to 20-30 Nm (14-21 lb-ft).
  1. Install upper radiator hose . Tighten clamp securely.
  1. Fill and bleed cooling system with proper amount and mixture.
  1. Start engine (6007) and check for coolant leaks.

Apr 04, 2009 | 1995 Ford Aerostar

1 Answer

Coolant still leaking from my 1996 Isuzu Rodeo.


There is a plastic heater pipe junction behind the inlet manifold against the fire wall that could be brittle and leaking.

Nov 16, 2008 | 1995 Isuzu Rodeo

Not finding what you are looking for?
1995 Ford Ranger Supercab Logo

Related Topics:

474 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...