Question about 2005 Ford E-Series

1 Answer

2004 e 450 Cranks no start \no trouble codes all relays and fuses check good 12 V TO INJECTOR less than 1 v to coil no power to fuel pump

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have not fixed this problem

the chat session ended prematurely and i still need trouble shooting assistance.

I hope you only charge for successful conclusions.

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Crank but no start


What make , model an year vehicle ? Could be a relay problem , power hold relay for ford , ignition 1 relay for GM vehicles or ASD - auto shut down relay for jeep , dodge , Chrysler vehicles . Asian vehicles have them too , Honda - main relay powers fuel injectors , coils etc.... Do you know how to do basic automotive electrical testing ? Check for voltage ? You would need to look at a wiring diagram for your vehicle , see which wire powers the coil an injectors etc...test for B+ voltage ! Videos on you tube showing how to test ignition , fuel etc..

Jun 03, 2016 | Cars & Trucks

1 Answer

Engine cranks but no start


Check the fuel pump. Fuel pump relay. Car security system.

Oct 27, 2015 | 2011 Kia Forte

1 Answer

I have a 2005 jeep liberty crank no start, no codes. battery,plugs, coils, fuel relay/fuses,crank&cam position senors all good. injectors have good resitance and power. no fuel pressure. pump in...


Might check for power to pump. You have fuse (some have 2), relay, and pump. These pumps are common failure items, and the aftermarket offers several really poor quality replacements. Either get a Delphi brand, or dealer pump. If you drop the tank remember an empty tank is full of fumes which are more explosive than the fuel is. Don't use a trouble lamp with incandesent bulb; use battery flashlight. BE CAREFUL!

Feb 10, 2015 | Jeep Cars & Trucks

1 Answer

1997 neon will not start


Check the ASD relay in under hood fuse/ relay box. ASD stands for automatic shut down relay. Powers up pcm ,fuel injectors and ignition system an O2sensor heaters .crank over the car an check for power at O2sensor heater fuse in the underhood fuse box ,no power means bad relay !

Jan 18, 2015 | Cars & Trucks

1 Answer

My 1993 E-350 club wagon wont start Code: 542 =


Replace the TCM to fix the converter clutch problem.. The line 12 volt is direct power from the battery and 7 volts out the I am suspicious off as I think that the coil for the relay is partially shorting out to give the 7 volts. As for the other wire 12 volts in would be ok but if there is nothing out unless it is a relay that has not closed because the relay coil has not activated correctly.. Check the readings against a new relay.

Nov 01, 2013 | Cars & Trucks

1 Answer

1989 cutlas cera wont start its giving me code 12


Code 12 is a "good" code-it means system normal.
Since no codes are stored, check for spark and check for gas-is the fuel pump coming on? You should hear the pump buzz for a couple of seconds when you turn the key to on-it should start and pressurize the lines, then shut off until the engine is cranked-when cranking, pump should be running again. If you don't hear the pump, check if the fuel pump wire at the gas tank connector has power to it when the engine is cranking. If it does and the pump is not working, the pump will need replacing.
If no power, check the fuel pump fuse and relay, under the hood.
If the fuel pump is working, it may be ignition related-check for spark. You need to see a blue snapping spark to know the ignition system is good. If no spark, suspect the ignition control module or the crank position sensor -or the pickup coil, if no crank sensor. The pickup coil will be in the distributor-if you have one. If no distributor, crank position sensor is behind the crankshaft harmonic balancer.
If fuel pump and spark are good, you will need to diagnose the injector circuit.
Post back with what you find.

Sep 20, 2013 | Oldsmobile Cutlass Ciera Cars & Trucks

1 Answer

Truck will not start... checked the wires... replaced battery... am getting fuel... all fuses are good...checked the wiring harness going to coil packs-have juice...checked the coil packs... took them


Normally we start with the basics, are the spark plugs firing and are the fuel injectors opening and providing fuel, and does the engine have compression.
Also, are there any stored trouble codes in the computer?
There is a relay that powers the injectors and fuel pump. You say you are getting fuel so we will assume that relay is ok.
The crank or cam sensor could have failed, or a list of other things.
You will need to figure out if you are lacking fuel or spark to the plugs to proceed.

Jul 23, 2012 | 1999 Ford F150 Regular Cab

2 Answers

1997 dodge ram won't start. My fuel pump does not run and coil won't spark. Iv'e checked fuses and relays and they look fine. Could a bad fuel pump cause the asd to kill power to the coil?


First check any ignition/fuel related fuses. Check to make sure you have 12 volts coming into the pump and coil. If nothing to the fuel pump replace the fuel pump relay - if you do have power to the fuel pump then replace the pump. If nothing is coming to the coil it is either an ignition relay or a wiring issue. If you have 12 volts to the coil but no spark then replace the coil.
Also the fuel pump/relay would not kill the coil.

Jan 21, 2010 | 1997 Dodge Ram 1500 Club Cab

3 Answers

E 450 motorhome cranks but no start


E 450 bus, shutdown, failes to restart. cranks over, can the fuel shutoff be the problem? if so where is it located?

Jan 07, 2009 | 2005 Ford E-Series

Not finding what you are looking for?
2005 Ford E-Series Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...