Question about 2003 Dodge Dakota Club Cab
My trucks window doesn't want to roll up or down anymore. I rolled in down and it went down just fine and now it doesn't want to go up. It only goes about 5 inches up and gets stuck. I rolled it down after a snow storm. Im not sure if its off the tracks or if it needs a fuse. Where is the window fuse located on a 2003 Dodge Dakota.
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I respectfully disagree.
WD-40 contains volatile ketones that will damage the rubber.
Pure silicone spray is the ticket here.
What you have going wrong is a bad "positive temperature coefficient thermister" in the window motor. It cannot be replaced, it is part of the motor assembly. You are going to probably need to replace the motor in the near future. The PTC understands a slight overheat condition, and when the motor "drags", or goes slow, the PTC opens up like a circuit breaker. Then, after it cools off, it closes, and the motor works again.
Lube the rubbers with silicone, and consider replacing the motor.
Posted on Mar 07, 2009
SOURCE: Power windows roll down slowly
You can try a dry lube or lithium grease on the slow ones, but it sounds more like you need new window motors. Unfortunately Saturns are plastic cars, and... The window motors are not too difficult to change and it requires removing the outer door panel to make it easier to access.
Posted on Mar 26, 2009
If you have power windows it should be a broken cable, If its manual then it should be the crank asm. or the white plastic trac, it may torn at the end.
Posted on Apr 26, 2009
SOURCE: 2004 Saab 9-3 Window reset
I had the problem of the drivers window rolling back down. This was fixed by removing the electrical connector located behind the door hinge. It looks like an oblong block. You have to prise the top ribbed part right up then pull the block out. Leave out for about 1 minute. Replace it
Posted on Sep 09, 2010
Tips for a great answer:
Apr 04, 2014 | 2011 Dodge Dakota
Nov 01, 2013 | 1997 Dodge Neon
Oct 03, 2013 | Dodge Avenger Cars & Trucks
Mar 22, 2013 | 2003 Hyundai Elantra GLS
Jun 06, 2012 | 2003 Dodge Stratus
Jul 30, 2011 | 2000 Dodge Dakota Quad Cab
Feb 07, 2011 | 2008 Dodge Avenger
Jul 01, 2009 | 2000 Dodge Dakota Quad Cab
Aug 26, 2014 | 2003 Dodge Dakota Club Cab
657 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: