Question about 1992 Chevrolet S-10

2 Answers

Wont start - but cranks well

I shut off my '92 S-10 pick-up (6 cyl) last week after running fine - now it wont start...it cranks great but wont turn over.
battery is fine, fuel in the tank....please help?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 409 Answers

Check your throttle position sensor. If it is bad it is telling the computer that the engine is flooded and not letting it get fuel.

Posted on Jan 07, 2009

  • John Weathers
    John Weathers Jan 07, 2009

    Check your Throttle Position Sensor (TPS) if it is bad it is telling the computer that the engine is flooded and not letting it get fuel. 

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 404 Answers

Hi!
From your description you say it cranks so I presume the engine is being turned from the starter? if this is so then it sounds possible that the Cam Belt/chain has failed.
Hope this points you in the right direction,
Paul 'W'

Posted on Jan 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 f150 turns over fine, at times wont run


When it won't start is there spark , does the check engine light come on when you turn the key on ? What's battery voltage at when it won't start , is the charging system working . When it won't start check power an grounds to the PCM/ECM - engine computer , your need a PCM/ECM connecter pin out .

Jan 22, 2016 | Cars & Trucks

1 Answer

1994 ford ranger runs fine until i go to town then just shuts down but will crank over and fuel is getting to it


check ignition pick up its in the distributor. its responsible for spark in the plugs

Dec 04, 2012 | 1988 Ford Ranger

1 Answer

6 cyl 2.9. drove to work fine. turned off. 15


all i can say is check for power and ground at the fuel pump. get someone to turn the key to the on position (not crank!) and use a test light to see if you are getting power.

Aug 27, 2009 | 1987 Ford Ranger

1 Answer

Parked my Jeep last. Was running fine. This week


It would be wise to check the timing and see if timing belt may have jumped or if it has a chain same thing. Also make sure if vehicle is getting fuel and spark first if this is ok then check the timing belt or chain. have someone spin engine and watch the rotor inside distributor and see if it turns. If not belt or chain is broken. If it does turn make sure it is in proper position. Fuel and Spark and then timing.

Jun 19, 2009 | 1985 Jeep CJ7

2 Answers

90 jeep starting problem


Check the crank position sensor. I had the same problem in a 1989 cherokee 4.0, and the solution was simply to acomodate the sensor wiring. No replace was necesary

May 31, 2009 | 1990 Jeep Cherokee Limited

1 Answer

Car died the other day, and now it wont start. Everything such as dash and radio seem to be working fine.


hi there the things to check are do you have a spark at the plugs?
do you have compression ?
are the cam shafts turning?
is the cam belt intact?
this are all needed to make the engine run it will turn over great but not start with this things not working infact if the last 3 are not there it will sound diffrent when you are turning it over with the key.

hope this helps Regards JR

May 30, 2009 | 1995 Oldsmobile Cutlass Supreme

1 Answer

1996 f150 5.0 idles fine then stalls and wont start


belive it or not you may have a defective IAC Valve , it is common for the valve not to work correctly and not set a code in the ECM

Feb 06, 2009 | 2004 Ford F150

1 Answer

No start


this sounds like a computer issue or rotor issue- it could be the pick up in distributer electronic pick up in distributer- gets hot then signal won,t travel- cools down then o.k

Sep 27, 2008 | 1991 Audi 100

Not finding what you are looking for?
1992 Chevrolet S-10 Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...