Question about Chevrolet Cavalier

2 Answers

Info on Aftermarket Generations Alarm AGA1201

I'm looking for information on Aftermarket Generations alarms. I'm looking at the AGA1201, it will be for a 03 Mitsu Lancer ES. Is there any guides or step-by-step on installing this yourself? Do I need anything else with this alarm? Is it reliable, confusing, P.O.S.? lol Thank you for your help.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'm wondering if you can comment on the reliability and range of this particular remote start system. Is it anywhere near the range of 2600' that it claims? Any issues?

Posted on Dec 19, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

The first link takes you to a good cheap place to buy this particular Aftermarket Remote System
The second two links offer diagramming and installation information. Hope this helps.


http://cgi.ebay.com/NEW-AGA1201-FM-Car-Alarm-Remote-Start-Keyless-Entry_W0QQitemZ230313882162QQcmdZViewItemQQptZCar_Alarms_Security?_trksid=p3286.m20.l1116



Info on Aftermarket Generations Alarm AGA1201 - icon_bins.gif www.the12volt.com/ · Cached · Save Free vehicle wiring diagrams and technical information for car stereo, car alarm, electronics installers. Ohm's law, resistors, passive crossovers, subwoofer boxes, ... Free Vehicle Wiring, Relay Diagrams, ... ... icon_bins.gif www.vastbeyond.com/440.htm
Find Free Automotive Wiring Diagrams! ... Your Simple Source for Free Automotive Wiring Diagrams ... Free Automotive Wiring Diagrams.

Posted on Jan 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why my alarm want stop going off?


Week or dead battery on your remote. Change the remote battery, got nothing to loose except a couple of bucks

Oct 06, 2014 | 2002 Acura TL 3.2 Type S

1 Answer

Cobra troubleshooting


We do not have info on aftermarket systems. Suggest you remove it completely and install a quality system.

Dec 31, 2013 | Cars & Trucks

1 Answer

Alarm deactivate for a 1999 Plymouth Breeze. Its said that this model did not come factory with an alarm and this one seems to have one we can't deactivate, therefore, we cant get it to start and we have...


be looking for any electronic name on a control box somewhere or a tag with a dealer name having to do with car stereos or whatever..do you have any info on the past owner(s) where there was any aftermarket stuff done??.. see if the stereo has any info in or on it somewhere..

Dec 23, 2013 | Cars & Trucks

1 Answer

Trunk release not working on aftermarket remote start/alarm.


Their Commando FM 870 has a remote transmitter pager and remote starter, allowing you to control your car from almost a half mile away. It instantly alerts you if your car is being tampered with ($169). CommandoAlarms.com is their website.------------------------------------------------------------------------------------
FGTECH Adapters

Dec 14, 2012 | Hyundai Motor 2003 Sonata

1 Answer

What name or acronyms would be for the fuse to the aftermarket security system?


Aftermarket alarm systems do not have there fuses in the cars fuse boxes, the fuses are located in line to alarm system.
You will need to look under the driver side of the dash and locate the alarm box, and then follow wires back a little, there you will see a few fuse holders containing the fuses for that alarm system good day

Jul 01, 2012 | 2005 Kia Spectra

1 Answer

How can I reset alarm?


The black reset is to reinitialize the TPMS system.

It sounds like you may have an aftermarket alarm since you described a red reset button under the dash that is not factory?

What I would suggest is to grab a flashlight and look under the dash on the drivers side. You may need to remove a trim pannel to gain access. You should see a black box with a bunch of wires randomly going all over the place (stock wiring is nice and neat comparatively speaking). This will be the aftermarket alarm. There should be a model number on it. Google search that model number and you should be able to find all kinds of info on that system.

Jan 31, 2012 | 2006 Toyota Tundra

2 Answers

Don't know what the picture on the dashboard is for? Looks like a radiator, but not sure. Misplaced car manual


the alarm automatically arms 30 seconds after you lock the doors
i looked around online and found info for you

The FACTORY ALARM DISARM WIRE IS
lt. green/orange '-'conn. 2, pin 9 @ the BCM.

The factory alarm disarm wire is
negative trigger thru a 473 ohm resistor.
MUST use relay. The BCM
(Body Control Module) is attached to
the left of the fusebox.
Connector 1 is a gray 26 pin plug,
and connector 2 is a gray 22 pin plug.

Once Located, splice into this wire with
a simular guage wire, add the specified resistor
and put it to a solid chassis ground.
This terminates the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Take this info to your local
stereo/car alarm guy and have them
do this for you.

Sep 16, 2011 | 2005 Jeep Liberty

1 Answer

2006 jeep liberty. In the middle of the night the jeep would make a honking noise with short honks. We never had the alarm set. What would cause this and how would you turn the alarm system off.


the alarm automatically arms 30 seconds after you lock the doors
i looked around online and found info for you

The FACTORY ALARM DISARM WIRE IS
lt. green/orange '-'conn. 2, pin 9 @ the BCM.

The factory alarm disarm wire is
negative trigger thru a 473 ohm resistor.
MUST use relay. The BCM
(Body Control Module) is attached to
the left of the fusebox.
Connector 1 is a gray 26 pin plug,
and connector 2 is a gray 22 pin plug.

Once Located, splice into this wire with
a simular guage wire, add the specified resistor
and put it to a solid chassis ground.
This terminates the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Take this info to your local
stereo/car alarm guy and have them
do this for you.

Sep 16, 2011 | 2006 Jeep Liberty

1 Answer

1996 audi wont start sometimes and the alarm goes off


1996 Audi if you are a aftermarket alarm look under the steering column and the dash area look for a small push button or a black push button when you find it push it and try to start the car,and if you are a aftermarket alarm you can adjust the sensitivity it on the transducer, If you are a manufacature alarm you ll have to find a auto electric tech who can remove the alarm this will consist of bypassing the alarm relays,and the alram horn

May 01, 2011 | Audi A6 Cars & Trucks

1 Answer

Alarm System on a 03 Mitsu Lancer


I bought a viper and I love it and its one of the best alarms. you can find some that are after market for cheap at least 200 bucks or less. but good luck they are not easy to install.

Jan 07, 2009 | 2003 Mitsubishi Lancer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...