Question about 1997 Land Rover Discovery

1 Answer

Need to know how much pressure does a the power steering pump on the 96 disco  put out?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 175 Answers

About 1500 psi

This post: http://www.aulro.com/afvb/technical-chatte...html#post392200 seems to confirm.

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I accidentally put brake fluid in the power steering pump of my 96 Dodge Ram


Do not start it brake fluid in the power steering. Will destroy the seal in the whole unit if you have started it you will need to take the return line off at the pump and flush it asap you can use trans fluid it has cleaner in it

Nov 03, 2012 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Hi pressure line leaking on bottom side of power steering pump on 96 windstar. not sure if it's the discharge or return side. it is the line that is fitted to the pump with a clamp and goes down into a...


a pressure line on a power steering pump would be blasting the fluid out,, not just a small leak,, and with power steering hoses, your b est best is to replace the line as factory specs call for,, I have a honda that for some unknown reason they decided the PS hose needed to go all the way around the back of the motor, and back within 8 inches of where it came from to the steering arm,, silly I know, But that way its costs 10 times as much ,

Jul 01, 2011 | 1996 Ford Windstar

1 Answer

I need to know where is the oil presure switch of a 2003 ford windstar 3.8l


On a 1996 3.8 L Should be under the power steering on the block. Looking at the pulleys on the right side just above the oil pan. This would involve removing the pwr steering punp and hoses.

I don't know if a 2003 is different.. You could inspect the area visually to check it.

To get to replace it...
96 - 98 windstar 3.8 oil pressure switch is located under power steering pump. Remove serpentine belt and alternator. Remove PS pump pulley with special puller to get access to PS pump bolts. Drain PS pump and remove PS hoses. Remove PS pump.

Nov 30, 2010 | 2000 Ford Windstar

2 Answers

Power steering pump is stiff on occasion not only in the morning but sometimes during the day also.fluid is at normal level. belts have been replaced last year?


The fluid check valve built into the power steering pump may be bypassing your pressurized fluid back to the reservoir, and not assisting your steering input. You may need a new pump. The only way to know for sure is to have the power steering output checked with a guage set.

Mar 07, 2010 | 1996 Toyota Camry

2 Answers

Lost power steering and brakes on 96 Astro


Hello altgraph1: My name is Roger and I can help. The power steering and the brakes are directly connected. If the power steering pump fails you will also loose the brake assist. This vehicle does not have a vacuum booster you have a hydro-boost brake system. This unit uses the power steering pressure to assist the stopping of the vehicle. You will need special tools to determine if the power steering pump failed or if the hydro-boost system failed. Most likely the power steering pump failed. How ever to be sure it should be tested first. Should you need further help please just ask. Please rate the answer you received. Thank You for using Fix Ya. Roger

Oct 28, 2009 | 1996 Chevrolet Astro

3 Answers

My 96 Maxima is hard to steer. when cold


Try having the fluid changed and the filter in the powersteering pump changed and that should get rid of the problem. Please rate if this helped. If the fluid is smelly and brown it needs to be flused and use lucas power steering fluid to fill it with, if it does not help then you will have to pressure test the pump output and electric control valve to see if it's failing, if not then you have a rack and pinion problem and will need to be tested to see if a clyinder is bypassing.

Aug 12, 2009 | 1996 Nissan Maxima

1 Answer

Locate power steering pump on 96 buick lesabre


I have a 96 buick century 6 cylender every thing comes on but like nothing will turn the motor over

Apr 16, 2009 | 1996 Buick LeSabre

1 Answer

Power steering leak


Top off resovior with P/S Fluid then get a helper Satrt Engine Have Helper Steer ALL the way to Left and Right while You Look at hoses at Porew Steering Pump and Under Vehicle this way You Should Find it Easy if It Sprays Out Fast it IS the Pressure Side of System. Hope this hepls Please dont forget to RATE ME Thank Tou !!

Jan 20, 2009 | 1998 Land Rover Discovery

1 Answer

96 civic power steering rack R&i


just remove old rack install power rack in its place bolts up the same look at acivic with power steering to determin hoses go get apower steering pump braket and the power steering resevor and braket make sure u get an alignment after ur done

Dec 18, 2008 | 1996 Honda Civic

1 Answer

96 landrover disco power steering pump bracket broken off


Really stupid question but did you get the correct belt and did you adjust the belt tensioner? On vehicles with spring type tensioner it must be pried back and then released. Slide type tensioners are usually either part of the pump bracket or alternator bracket assembly.

Dec 07, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1997 Land Rover Discovery Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...