Question about 1995 Nissan Maxima

1 Answer

REMOVAL OF THE SERPENTINE BELT AND THE FAN BELT

How do I remove the serpentine belt and the fan belt from my 1995 Nissan
Maxima? I turned the nut that's behind the idle wheel but the idle wheel does not move up or down so that the belt can come off.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 43 Answers

You should look for spring loaded tension pully .in this pully you will find a square hole put a 1/2 inch drive ratchet (no socket) into this hole & apply pressure until belt loosens don't forget remeber the way belt came off

Posted on Jan 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change power steering belt


How To Change The Serpentine Accessory Belt On Nissan Maxima Altima Etc

Nissan Drive Belt Tensioner and Belt Replacement 3 5 Front Wheel Drive

There are several videos on how to change out the serpentine belt For more info just do a web search " 2002 Nissan Altima serpentine belt replacement".

May 26, 2014 | 2002 Nissan Altima

1 Answer

Instructions needed for changing serpentine belt on 2002 Ford Windstar 3.8L


  • the serpentine belt routing chart, adhered to the fan shroud. This chart will show you the location of the belt tensioner.
  • 2 Pull the belt tensioner off the belt with the serpentine belt tool. Reach in with your free hand and slip the belt out of the tensioner's path and then slowly move the tensioner back into position.
  • 3 Pull the belt off the remaining pulleys by hand


  • Read more: 2002 Ford Taurus Serpentine Belt Removal ' eHow.com http://www.ehow.com/how_7233863_2002-taurus-serpentine-belt-removal.html#ixzz1XPRa20xf

    Sep 09, 2011 | Ford Windstar Cars & Trucks

    1 Answer

    How do you change the water pump on a 1995 4x4 chevy tahoe?


    First thing to do, is take your new pump out of the box, and glue the two gaskets to it with really good silicone sealer, such as permatex right stuff. Put a thin layer of this on the engine mating surface also. DO THIS NOW. Assuming v8, v6 is very similar. drain coolant,remove 4 bolts which hold on upper fan shroud, remove fan blade, either four nuts on studs, or one large nut behind fan. Notice i didn't say remove belt, as that will aid in fan removal. If you have the one large nut variety, most parts houses will rent you the tool. remove serpentine belt, Now remove the lower hose( and wonder why you drained the coolant, as the rest will come out now and make a mess) There are only four bolts holding the pump to the engine. A 9/16 socket will remove them. Clean the threads off on the mounting bolts. Apply a small amount of sealer to the threads. Go and get your new pump the one that has the gaskets now glued to it, (see why the first step was so important)Start your bolts carefully, torque to spec(we all say this but usually we don't) reverse removal procedure, and refill coolant. Bob's your uncle!

    Jun 25, 2011 | 1995 Chevrolet Tahoe

    1 Answer

    How do I remove the belt so I can remove the Water Pump?


    If you are referring to serpentine belt, Thisis how to do it. Lift the hood and prop it open. Find thelock nut on the serpentine belt and use a wrench to loosen it. Turn the adjustment bolt counterclockwiseto remove the serpentine belt. This bolt is located under the water pump hose.Remember how you remove the belt so that you can reroute the new beltcorrectly. Install the new serpentine belt by securingit on the pulleys in the same route as the old belt. Check the belt routing onthe underside of the hood to make sure you get it right. Create tension in the back of the belt byturning the adjustment bolt clockwise. Check that the belt is on each pulleyproperly. The belt should be centered on each pulley, not on the edge.Tightenthe lock nut to secure the serpentine belt in place.

    Jan 04, 2011 | 1995 Nissan Sentra

    1 Answer

    2005 Maxima, brake and battery warning lights are on. Serpentine belt looks good and the brake fluid level is ok. What else could it be?


    THE ALTERNATER IS DEFECTIVE.
    CHANGE THE ALTERNATER.--REMOVE THE SERPENTINE BELT BY PUSHING THE TENSIONER PULLEY WITH A CROW BAR OR BIG SCREWDRIVER. BE CAREFULL TO NOTE THE ROUTING OF THE BELT FIRST, THEN REMOVE THE ALTERNATER BOLTS. INSTALLATION IS THE REVERSE OF THE REMOVAL.

    Sep 07, 2010 | 2005 Nissan Maxima

    1 Answer

    I squeeling sound that could be fan belt


    The serpentine belt should be replaced it is worn out an is slipping.

    Nov 03, 2009 | 1995 Nissan Maxima

    1 Answer

    How to change a altornator on a 95 nissan maxima


    first you need to release the belt tensioner, and remove the belt. Disconnect the battery, and remove electrical plug on aternator. Then simply unbolt the old alternator, bolt in the new one, re-attach the the electrical plug, connect the battery back up, and re-install the belt. FYI this would be a good time to replace the serpentine belt.

    Sep 21, 2009 | 1995 Nissan Maxima

    1 Answer

    Maxima 2006 drive belt


    First, keep this link which is to the diagram of the serpentine belt. It will be useful in knowing how to route th new belt...
    http://www.gates.com/common/part_locator/view_diagram.cfm?id=S4003

    Next, here's a link to a good video on how to replace a serpentine belt...
    http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

    Sep 12, 2009 | 2000 Nissan Maxima

    1 Answer

    Both Serpentine belts


    The power steering pump will have a tensioner you need to loosen. Then for the other belt. There is a tensioner located on the pass side. You can see it if you look down the pass side of the engine.

    May 11, 2009 | 1995 Nissan Maxima

    Not finding what you are looking for?
    1995 Nissan Maxima Logo

    Related Topics:

    579 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nissan Experts

    yadayada
    yadayada

    Level 3 Expert

    60667 Answers

    Phil Lovisek
    Phil Lovisek

    Level 3 Expert

    705 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21936 Answers

    Are you a Nissan Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...