Question about 1991 Honda Prelude

3 Answers

Wheel bearing? when driving my honda prelude 91, the steering wheel shakes and makes noises..what's wrong with it

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

To tell you the truth i have a prelude myself, the reason why it does that is because it needs new brakes or to align them. it used to happen to me until some mechanic told me that, when i change the brakes the shaking went away or check the brake fluid.

Posted on Jan 09, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 204 Answers

Honest opinion here.....There could be a number of things wrong with your car. I would take it to Midas or somewhere similiar and have them tell you whats wrong for free then fix it yourself if you can. Thats how I would isolate this problem. A little bit of time at Midas or somewhere simliar will save you time and take all the guesswork out of things.

Good luck to you..

Sincerely,

JC

Posted on Jan 06, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 367 Answers

If it is a howling noise it is most likely your bearing (kinda sounds like an airplane)

You should also check the tires for broken belts and bulges. As well as that they are properly balanced.

Posted on Jan 06, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

dmfixit
  • 226 Answers

SOURCE: what is wrong with my

bad bearings in the hubs can cause it try changing your hubs (hubs are sealed units when the grease in them dry out you need new 1's)

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front end squeeling noise on 2007 honda accord


could be the power steering pump itself. If it has a bad bearing it will do that. Especially when you turn it makes the steering pump work a lot harder.

Aug 31, 2017 | 2007 Honda Accord Sedan

1 Answer

I have a 2004 honda civic and it makes a droaning noise when i change gears, coudl this be an internal gearbox fault? i also have a constant screaching noise when driving when i slighly move the steering...


Pilot bearing or a throw bearing is what makes the noise while shifting gears and as for the steering noise, you either have low steering fluid or the steering pump belt is loose.

Aug 11, 2011 | 2005 Honda Civic

1 Answer

Noise and vibration from right side wheel area.


Sounds like a possible wheel bearing failure. Jack that wheel up and grab the tire at the top and bottom and shake/yank it hard - you should have basically no movement out of it. If you shake it and find looseness, that's a bad wheel bearing.

Mar 20, 2010 | 2004 Honda Civic

1 Answer

I need a diagram of the front suspension and sway bars 91 honda


if its noisy, something is bad wrong. lift it up and have one your kidsturn the steering wheel and look for anything loose. I would not have purchased any car that had been hacked like that. ck ball joints, ck for any loose bolts, ck everything you can see. dont drive it intil you find and repair what is wrong. without knowing what is wrong, i would say it coulld be dangerous.

Sep 23, 2009 | 1991 Honda Accord

1 Answer

Metallic jingle in the front wheel area while turning. My guess is wheel-bearing.


Wheel bearings usually make grinding noises, check your cv shaft first.

Consider purchasing a mechanics stethescope, it will greatly help to diagnose noise issues like this one.

Sep 22, 2009 | 2001 Honda Prelude

2 Answers

Shaking steering above 60mph


First we need to know where is the shaking noise coming from?Is your car a 4X4?If noise comes from a driven wheel it can be the differential system or bearing also.Usually the speed you have specified is pointing to wheel alignment problem.Also can advice to go to a different tire shop and check wheel alignment again,also ask the mechanic to check the state of your wheels and tires.One of them may be damaged .

Jul 17, 2009 | 2006 Honda Odyssey

1 Answer

Axel


Usually the indication is around corners the CV joint will make a popping sound. You can also tear the boot on the CV joint, but my theory is just to drive it until it makes noise. No sense in changing it when there is still life in the old one.
Really the only thing that goes wrong is the CV joint portion of the shaft wears out, except accidents and other unforeseen instances.
You can buy lifetime warranty axle shafts from Auto Zone or Advance and those kinds of parts stores.

Feb 11, 2009 | 1991 Honda Prelude

1 Answer

What is wrong with my honda prelude 91 when i'm driving it and the steering wheel shakes and make noises


bad bearings in the hubs can cause it try changing your hubs (hubs are sealed units when the grease in them dry out you need new 1's)

Jan 06, 2009 | 1991 Honda Prelude

1 Answer

Car steering


There could be numerous problems going wrong. Your car is rear wheel drive so it could very well be a bad wheel bearing. If it is extremely loose it can cause a shake in your steering wheel. You may want to check on the condition of your tires and rims especially the left front. A bad tire can cause a shake and pull. If you know how to use your car jack you can try jacking the vehicle up, and put both hands on your front wheel and move it manually to see if there is looseness. Most shops only charge about 1/2 hour to shake down the front end. BMW parts are expensive so be prepared!

Jul 19, 2008 | 1994 BMW 3 Series

Not finding what you are looking for?
1991 Honda Prelude Logo

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...