My check engine light has come on and there is a local parts place here that will let you use their diagnostic equipment at no charge as long as you stay in their parking lot. I can then bring the code into them and they will let me know what it means.
This will save me the $75 fee to take it into a shop in addition to whatever it is thats wrong with it. So my question is where on my 2001 Daewoo Leganza CDX do I find the spot that this should be plugged into?
SOURCE: Daewoo Leganza 2000 timing belt broke
there are no manual at napa or any where else except dealer. they want 100+ dollars for one in MI.
SOURCE: ECU port for 99 Daewoo Leganza
I came here for the same problem. After several trips into the cold I found it. If it is the same as the 2000 Leganza, it is black, located on the drivers side, right knee, pointed down, and attached to the dash,
SOURCE: Daewoo Leganza 2001 4 cyl/gas CDX.
if it still pulls good its ok but your cooler in the radiator has come apart so you need to buy an aftermarket trans cooler and flush the tranny and refill with new fluid
SOURCE: How to scan the 2001 daewoo nubira fault codes.
Your port should be located under the dash on the driver's side near your knee area. The port should be pointing straight down from the dash. The scanner will be plug and play and you shouldn't have to jump and pins for the OBD-II port. As for the codes, there are so many thousands of codes that you can't even guess what codes will be generated from your scan
167 views
Usually answered in minutes!
i have the engine check light displaying on my dash board also its reving on tick over why is this? is it a major problem?
×