Question about Chevrolet Tahoe
You can call the dealer with your VIN# and the serial# from the radio, but that means you have to pull the radio first. Not ******* your vehicle. First pull out your cup holder on the dash as you would to use it. Second, turn on your key and put the vehicle in first gear, all the way down. Tilt your wheel all the way down. Dash panel will pull out easily, no screws just clips. Pull firmly, but not too hard, straight out all the way around the panel. BE CAREFUL NOT TO BREAK THE HAZZARD SWITCH. VERY EXPENSIVE. Push the hazzard switch down and gently pull the panel over it. Disconnect any wire harnesses on the radio side so that you can tilt the dash panel away from the radio. The radio will also just unclip from the dash. On either side you will see clips on the radio that you need to push straight down and then just pull straignt out. There you go. Good luck.
Posted on Jan 06, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 10, 2015 | 2000 Chevrolet Silverado 1500
Feb 05, 2015 | 2004 Chevrolet Tahoe
May 18, 2010 | 2000 Chevrolet Malibu
Mar 14, 2010 | 2000 Chevrolet Malibu
Jan 25, 2010 | 2000 Chevrolet Tahoe
Aug 12, 2009 | 2004 Chevrolet Tahoe
308 people viewed this question
Usually answered in minutes!