Check engine light is on
A P0106 code means the computer has detected a reading from the MAP that is outside the acceptable range.
Problems that can cause the MAP sensor signal to be outside the specified range:
- Leaking EGR valve
- Vacuum leaks
- Dirty fuel injectors
- Wrong fuel pressure
- Low engine compression
- Ignition miss
- Carbon deposits on the intake valves
- Valve problems
Go to any mechanic with a code reader. They will plug it in and find the code that will have been set in the cars computer. This code can be looked up by the mechanic to find out wat the problem is. You need to do it NOW!
Regards,
Andy
SOURCE: hold light on console
The hold light is probably for a fault in the HILL HOLDER SYSTEM
This system holds the Forester on a hill without using the brake pedal, as long as you keep the clutch depressed. It's very useful when towing.
I will check my workshop manual as soon as I have some free time and try to get a definitive answer for you.
Regards,
Andy, Derbyshire UK
SOURCE: 2003 Subaru Forester X Dash Lights out
just follow the wires that cnnect to the speedometer light and screw to change bulb . thesame as to the tachnometer light there also is awire connected to it .
SOURCE: 2004 subaru forester, 99,000 miles. Check engine
Drop in to an Autozone, or Pep Boys, or similar big parts store & they will usually scan for codes free. This will hopefully eliminate all the guess work, or at least point everyone in right direction for better diagnosis. If not obvious from codes what the problem is, get back to us and we'll help you out.
Testimonial: "Thanks for the great suggestion . I'll have Autozone read the codes on Monday. Thanks again!"
SOURCE: Check engine light on. P0325, P0420 2000 Subaru
CODE PO420 CATALYST SYSTEM EFFICIENCY BELOW THRESHOLD BANK I * CODE PO325 KNOCK SENSOR NO.1 CIRCUIT MALFUNCTION BANK NO.1 OR SINGLE SENSOR
542 views
Usually answered in minutes!
×