At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
bad switch or motor To check the motor the motor has two connections. One for up and one for down. Try hot wiring the connections to check. If it works the drivers switch is bad
Check the tps "trottle positioning sensor, on mine the idle would not stay steady, and shift so hard that it would sound like it was going to break something. it is located on the drivers side of the throttle body with a push in electrical connector.
driver's side under the hood above the brake master cylinder ....should be 2 relays there... it's the outer one... they are identical and you can swap them temporarily to check that your fuel pump relay is working.
http://www.a1electric.com/s10motor.htm. This link has pictures and step-by-step instructions. I found it and have both sides to replace. Hope this helps.
×